Full Version: Vinyl Cutter/Plotter cutting software

From: JHayes55 [#15]
 10 Apr 2007
To: gt350ed [#12] 10 Apr 2007

If I am correct the demo will let you use it as a full program for about 25 or so times. That should be enough to tell if you like it. Let me know if it works well for you it might be one that I would look at for future use. From
a cost stand point and what it seems to have it looks good.

EDITED: 10 Apr 2007 by JHAYES55

From: gt350ed [#16]
 10 Apr 2007
To: Mike (MIKEN) [#10] 10 Apr 2007

Yea, up til now, I've been going by what Graphtec's CD had to say about Cut Master; namely that it was a plug-in for Illustrator only. As a result of your latest suggestion, I'll get in touch with Graphtec Tech Support and see if they have a plug-in for my CE3000-40.

Thanks for replying back again.

From: gt350ed [#17]
 10 Apr 2007
To: Larry B (PALMETTO) [#2] 11 Apr 2007

Larry: Thank you for your response to this thread. It occurred to me that your's was the first one received and that I had not responded to you. As soon as I received your reply, I went to the link you provided and ordered a demo. I'm initially impressed with what they have to say on their website. And the cost, at $499, is within my budget.

Interestingly, this company, as well as the company that Joe Hayes suggested, are both based in Australia. There's a "Peter" joke in there somewhere, I'm sure. B-)

Thanks again, and I apologize for failing to reply earlier. We "geezers" have to stick together, although you are MUCH older than me. :O)

From: Puck (PUCKERBRUSH) [#18]
 10 Apr 2007
To: gt350ed [#9] 10 Apr 2007

The vinyl bridge program I have (pro-cut) is a stand alone program.

I design in corel draw, save it as an .AI or .EPS file and then open it in pro-cut. It then layers it by colors so that I can either cut it by colors or I can cut it all at once if I want to. Can be sized, rotated, mirrored, sectioned or etc. I use it for cutting all my graphics. Very simple and great program. I believe co-cut might be the newer version of what I have.

I use the other programs I have for basic lettering but I could use them for the graphics if I wanted to but I like corel for designing and pro-cut for cutting, simple is what I like.

Sign tools should do everything you need and it's at a reasonable price.

Puck

Show messages: All  1-14  15-18

Back to thread list | Login

© 2024 Project Beehive Forum