Full Version: learning curve switching brands?

From: aallen [#4]
 11 Apr 2007
To: Mike (MIKEN) [#3] Unread

Mike,


WOW, you have had a few kinds!

Thanks, thats what I was thinking. I will look into the other machines to see if their are any obvious differences too.


Aleta


From: aallen [#5]
 11 Apr 2007
To: Boz (CHEDDARHEAD) [#2] 11 Apr 2007

Thanks for the info. Yes, I am one of those, that doesn't like change, at least now in my middle age! :S But, will adapt if needed. ;-)

Yes, I bought my Xenetech from the Brewers.


From: John (ICTJOHN) [#6]
 13 Apr 2007
To: aallen [#5] 13 Apr 2007

Aleta,

Don't forget that Xenetech has a larger table available and then you won't have "change" ans still have the best of both worlds - XWG and CorelDRAW print drivers.
;-)

-


From: laserman (MIKEMAC) [#7]
 13 Apr 2007
To: aallen [#1] 13 Apr 2007

Just a little info for all

The ULS systems will work using the Xenetech software.


From: aallen [#8]
 13 Apr 2007
To: John (ICTJOHN) [#6] 14 Apr 2007

John,

Yes, I have already talked to Xenetech about moving up to the 24x36 from my aurora. But, looking at the different options. This old dog might need to learn new tricks with a new brand :P

Thanks,

Aleta


From: aallen [#9]
 13 Apr 2007
To: laserman (MIKEMAC) [#7] 13 Apr 2007

Mike,

WOW, I didn't know that. Good info to have. I did contact Universal to see what they have available. Thanks for the info. :-)


Show messages: All  1-3  4-9

Back to thread list | Login

© 2024 Project Beehive Forum