Full Version: 5" x 8" Polished Chrome Plate
From: Cody (BOBTNAILER) [#9]
12 Apr 2007
To: Stunt Engraver (DGL) [#7] 12 Apr 2007
David,
If you have the name & address of the building, you can probably contact your local Otis office for the exact material. Elevator companies usually keep such project records for many years, and will probably be glad to help you.
As Randy pointed out, the "norm" for polished finishes on elevators is #8 finish, whether it be stainless or bronze (muntz).
Good elevator salespeople try to steer customers away from using anything but steel, stainless steel, or muntz for entrances. This is mainly due to the wear that the finishes will have endure....weather, cleaning solutions, bodily fluids, bumps & scrapes, etc.
From: Stunt Engraver (DGL) [#10]
12 Apr 2007
To: Cody (BOBTNAILER) [#9] 12 Apr 2007
Made me wonder why the company didn't contact Otis elevator and ask for an auxiliary plate.
Probably because they're a proeprty management company.
I did offer to make a temporary plate, if the "real" one took too long to manufacture.
I've also checked with ID Plates, who can either sell the bright unlacquered stainless, or acid etch the plate.
I'm leaning toward laser with CerMark because that's the way the stock lettering, i.e. capacity etc., inside the elevator was done.