Full Version: What's happening to my Epilog Legend 24 laser?

From: ram (MCTAWARDS) [#5]
 24 Apr 2007
To: baz (RINGROAD) [#1] Unread

Pls be sure that the air hose spreading on a metal tube, touch the x encoder reader and disturb the movt.

PUT OFF THE MACHINE.

Remove the top cap of the horizontal beam and see the head assy is mvg as usual when you move in your free hand. See the possiblity of touching x encoder reader module had friction on metal tube.

You could notice the scratch mark on the x axis encoder reader module.

if its., see the metal tube screws are correctly clamped on either sides.

proceed. else call tech guru.. techsupport at epilog.

Ram

Show messages: All  1-4  5

Back to thread list | Login

© 2024 Project Beehive Forum