Full Version: Oklahoma plaque
From: Sam (SAMC11) [#4]
17 Apr 2007
To: Cody (BOBTNAILER) [#2] 18 Apr 2007
Minnesota would have a problem with all those Jayhawks at their border. Talk about illegals?
Thanks for your in put.
Sam C
From: JHayes55 [#5]
17 Apr 2007
To: Sam (SAMC11) [#4] 18 Apr 2007
Sam - I might also suggest you check with Studio Workshop in Neb.
Their web site is www.studioworkshop.com. Phone number is on the web site and I suggest you call and talk to Martin. We have had custom shapes done here before and they do excellent work. Nothing wrong with the other suggestions just wanted to give you one more.
From: Sam (SAMC11) [#6]
18 Apr 2007
To: JHayes55 [#5] 18 Apr 2007
Thank you. I have not heard of these people. Will look at them. I can cut a state design if I have a outline I can transfer to a wood plate. Then bandsaw it to shape or even make a template and route it with a pattern router bit.
Thanks for your thoughtfulness.
SamC
From: JHayes55 [#7]
18 Apr 2007
To: Sam (SAMC11) [#6] 18 Apr 2007
Are you just looking for the OK state shape? If you just need a vector outline to resize I think I have it - I belive that Corel X3 has it on the Clipart disks. Let me know. I thought you needed the plaque made.
From: Sam (SAMC11) [#8]
18 Apr 2007
To: JHayes55 [#7] 19 Apr 2007
Thanks for your response. I have Corel X3 and will look for the vector outline in the morning. I can vector it onto a piece of walnut and then cut out on a band saw, or router with a pattern bit. I have spent several hours searching with out knowing X-3 has this design.
Thanks again,
SamC