Full Version: Corporate Binders

From: LaZerDude (C_BURKE) [#15]
 19 Apr 2007
To: Stunt Engraver (DGL) [#13] 19 Apr 2007

No. That would be toooooo easy....

From: LaZerDude (C_BURKE) [#16]
 19 Apr 2007
To: Bill (ALBILLBERT2000) [#14] 19 Apr 2007

Thank you Bill, I will be calling you.........I can make the seals here as well.

It's a CPA...he does not need the paper, he fills the binder himself.....price will be a factor....and out in the middle of the ocean, well, it gets expensive......because of freight...

BUT, who know. I'll be calling you tomorrow. Thanks for the help


From: Bill (ALBILLBERT2000) [#17]
 19 Apr 2007
To: LaZerDude (C_BURKE) [#16] 19 Apr 2007

Then if that is the case look into a pad printer or a used hot stamping machine

or cut gold foil using your laser for a decal.. I have even seen some companies just use View binders sold at any office supply house.. and put in a decorative ivory or fancy paper printed from a computer printer..

and yes view binders come with the binding side having a slip in opening


From: LaZerDude (C_BURKE) [#18]
 19 Apr 2007
To: Bill (ALBILLBERT2000) [#17] 19 Apr 2007

quote:
Then if that is the case look into a pad printer or a used hot stamping machine


The hot stamp won't work because of the rings... possibly a pad printer, but I know nothing about pad printing.......

I'll talk to you in the morning.....any particular time better than another?

From: Bill (ALBILLBERT2000) [#19]
 19 Apr 2007
To: LaZerDude (C_BURKE) [#18] 19 Apr 2007

I am on the east coast.. I get in about 8 ish.. but anytime is good..

From: JHayes55 [#20]
 19 Apr 2007
To: LaZerDude (C_BURKE) [#18] 20 Apr 2007

quote:
How am I going to cut it? I'd have to have a sign company do it....


Dude - use laser foil instead of vinyl - that way you can do it in house on demand. Laser foil is just polyester instead of vinyl.

From: LaZerDude (C_BURKE) [#21]
 20 Apr 2007
To: JHayes55 [#20] 20 Apr 2007

quote:
Laser foil is just polyester instead of vinyl.


Laser foil needs to be applied FIRST correct? I will have to find binders that have a smooth surface......

Thanks Joe

From: JHayes55 [#22]
 20 Apr 2007
To: LaZerDude (C_BURKE) [#21] 20 Apr 2007

You should test vinyl or the foil on the binders to make sure you have a surface that they will adhere to well.
If I were doing it with foil I would place it on my multi-mat then cut, weed away the part I do not need, put transfer paper over the letters, turn it over take away the backer to expose the adhesive back, stick on the binder, squeegee down - peel off transfer paper.

TA-DA.

If you do not have a muti-mat use cardboard & some masking tape to hold down the edges of your foil - having the cardboard allows you to take it out of the laser to put the transfer paper on - Got It???

Order multi-mat from Jeanette.


From: sprinter [#23]
 20 Apr 2007
To: LaZerDude (C_BURKE) [#1] 20 Apr 2007

I don't want to rain on your parade of using vinyl or foil, but by the time you do all the weeding, etc the labor alone is going to make them very expensive. Out sourcing even with shipping would be cheaper.

From: Dave Jones (DAVERJ) [#24]
 20 Apr 2007
To: sprinter [#23] 20 Apr 2007

Shipping to Hawaii is insanely expensive. The cheapest UPS service for a 2 pound box about the size of a thick 3 ring binder would be around $45-$50 and take a week from the east coast. 2-day shipping would be something like $55-$60.

From: sprinter [#25]
 20 Apr 2007
To: Dave Jones (DAVERJ) [#24] 20 Apr 2007

OUCH!!

From: UncleSteve [#26]
 20 Apr 2007
To: Dave Jones (DAVERJ) [#24] 20 Apr 2007

Take a look at the flat rate Priority Mail boxes from good old USPS.....

Last I heard, HI was still considered a state.... At least we don't need a passport yet. :-&

From: Dave Jones (DAVERJ) [#27]
 20 Apr 2007
To: UncleSteve [#26] 20 Apr 2007

Yep, but a lot of suppliers don't or won't use USPS. Chuck mentioned that here a while ago when talking about the source he had for some product.

From: Ruben (QUIEROLEARN) [#28]
 20 Apr 2007
To: LaZerDude (C_BURKE) [#21] 20 Apr 2007

Chuck,

how about sublimatable Mates or Mylar? it can be cut in the laser, Johnson Plastics sales this stuff


Ruben


From: LaZerDude (C_BURKE) [#29]
 20 Apr 2007
To: Ruben (QUIEROLEARN) [#28] 21 Apr 2007

Ruben,
Thanks...those might work.....and now
I have lots of options, but I need to find the binders first :)


From: Bill (ALBILLBERT2000) [#30]
 20 Apr 2007
To: LaZerDude (C_BURKE) [#21] 20 Apr 2007

You never called me... liar liar pants on fire.. lol..

Here is a link to Sterling .. they have a custom case that holds the embosser and ... look closely.. the attach a brass plate to the edge of the binger.. an engraved plate.. something you can do.. and there engraved plate looks like crap single line font of the actual corporate seal...


Go to a good office supply store.. not staples etc.. there has got to be good store for office supplies on the island.. that deals with.. Emco, United Stationers, Boise Cascade, or SP Richards.. all large wholesalers of all the major lines of binders.. and if you can't find one.. Contact Cardinal Biinder Company.. if you cant find them. I can get a number at work on monday..

 

http://www.sterling.ca/attache.html We use them for certain customers.. fast service.. but I am really just showing you the idea for a brass plate.. attached to the edge of the binder

EDITED: 20 Apr 2007 by ALBILLBERT2000


From: LaZerDude (C_BURKE) [#31]
 20 Apr 2007
To: Bill (ALBILLBERT2000) [#30] 20 Apr 2007

Guilty as charged....today was training day for my Vision engraver so I got side tracked......

The ONLY office supply store we have is OFFICE MAX grrrrrrr

But you have given me an idea with the plate....are you working tomorrow?

Thanks


From: Bill (ALBILLBERT2000) [#32]
 20 Apr 2007
To: LaZerDude (C_BURKE) [#31] 20 Apr 2007

No dont work on saturdays if I can help it.. will be back in on monday.. or email me at hibberts@netreach.net

From: LaZerDude (C_BURKE) [#33]
 25 Apr 2007
To: ALL

Aloha Gang,

I found this site for corporate binders through the thomas registery.

They have exactly what I need....I could even get them flat so I could hot stamp them if need be, but I have since found out my customer would be happy with an insert.....so that is probably what I will do.....

Thank you to every one for your help.

Show messages:  1-14  15-33

Back to thread list | Login

© 2024 Project Beehive Forum