Full Version: Training Day
From: LaZerDude (C_BURKE) [#7]
21 Apr 2007
To: Cody (BOBTNAILER) [#4] 21 Apr 2007
From: LaZerDude (C_BURKE) [#8]
21 Apr 2007
To: Stunt Engraver (DGL) [#2] 21 Apr 2007
David,
Yes, the "fear factor" has diminshed, but there is soooo much more to rotary/diamond drag engraving than there is with laser engraving, that I have to train my self not to forget the steps.....i know after awhile it will become second nature...but for now, it is quite bit to remember....
When we were at the show looking at it, you mentioned that you wished you were ready for a new machine.......you might want to gear up to get it next year, because it has a spiffy little feature that you will like.....
The machine and software actually MEASURE the engraving area by way of a laser tracking system....you input upper left and lower right, of the area you want to engrave, the machine the traces that area, and creates the table size in engravelab. You then hit ctrl-k and it centers the graphic/text in the middle of the engraving area. Hit engrave and go......
The proximity sensor is automatically disabled when using the rotary attachment, the pump starts automatically, AND if you forget to set the surface, the machine will NOT start.....until you do.
These features maybe be common on other machines but this is the first time I have used one, so it was pretty impressive.
Anyway, I tried calling you on your cell phone last night, but I think I hit a dead spot on the road.....just wanted to let you know I got it and thank you for your input and help.
Later.
From: Stunt Engraver (DGL) [#9]
21 Apr 2007
To: LaZerDude (C_BURKE) [#8] 21 Apr 2007
Chuck,
The laser measuring feature didn't escape my attention and I thought it was great. Some machines come with it and some don't, but I think it will become very common.
As I've nentioned in the past, although the learning curve for rotary/drag equipment is steeper, once its operation becomes second-nature (and it will) you'll be a highly-skilled technician.
With newcomers to the A&E industry buying primarily laser engraving equipment, you'll be in a position to create niches, where they can't (or won't want to) follow.
Exciting times ahead. :-)
EDITED: 21 Apr 2007 by DGL
From: LaZerDude (C_BURKE) [#10]
21 Apr 2007
To: Stunt Engraver (DGL) [#9] 21 Apr 2007
That thought crossed my mind yesterday when I was taking Howard back to the airport.
He used to do engraving, mostly metal items...and he was telling me he stopped because of the "odd" requests from folks......the kind of things YOU seem to thrive on.....anyway, it made me think of you, so I told him the tale of the "Stunt Engraver"........
I may need to become your prodigy .......... :O
From: Stunt Engraver (DGL) [#11]
21 Apr 2007
To: LaZerDude (C_BURKE) [#10] 21 Apr 2007
Odd requests, after you've successfully completed enough of them, eventually become not so odd.
If they're overly-odd, charge accordingly.
You'll build a reputation that may even lead to easier work. :-)
From: Mick [#12]
21 Apr 2007
To: LaZerDude (C_BURKE) [#6] 21 Apr 2007
Sorry
Got your tiles, used your files, printed my samples on 4 differedt types of tiles, and sent them back the next day via FedEx.
Watchy for them.
Times/temps and tile types are all written on the back of the tiles.
I think the problem is fixed, but you need to see the tiles to confirm it.
I forget about PM's and never check for them.
Mick
From: LaZerDude (C_BURKE) [#13]
21 Apr 2007
To: Mick [#12] 21 Apr 2007
Cool. Did you use the two tumbled tiles I sent you?
Thanks
From: Mick [#14]
21 Apr 2007
To: LaZerDude (C_BURKE) [#13] 21 Apr 2007