Full Version: Cutting Columns
From: Rallyguy [#11]
7 Apr 2005
To: Frazee1 [#6] 7 Apr 2005
Hi John,
Excellent points and suggestions on the saw setup...I would like to add one point. If you take too thin of a cut for testing on the 4x4, it can deflect the blade messing up your measurements and adjustments. You need to get a scrap piece off the opposite side of the blade (even if it's only 1/4 inch thick) to be sure it hasn't deflected the blade at all.
So, Make sure you create an actual slice of wood not just a slight cleanup cut on the face of the 4x4 and you will be right on with your measurements.
Brian G.