ARA Las Vegas 2006 (The List) - Engraving Etc. Forum

From:	Stunt Engraver (DGL)	2 Jan 2006
To:	Rolf (RJB2108)	18 of 343

2602.18 In reply to 2602.17

Rolf,

Knowing what a good time you had last year, I should have put your name much closer to the top of the list.

It's OK. We'll squeeze you in. :-)

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 2 Jan 2006 by DGL

From:	Cody (BOBTNAILER)	3 Jan 2006
To:	Stunt Engraver (DGL)	20 of 343

2602.20 In reply to 2602.18

David,

There was some talk last year about a separate nametag for EE members to wear...something that would let us easily recognize one another on the show floor.

Have you given any thought to a design for this year? I would think something with the EE website logo would be pretty nice.

Your thoughts?

Cody

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	Cody (BOBTNAILER)	21 of 343

2602.21 In reply to 2602.20
Cody, Last year, a few of us made our own namebadges, but we didn't have specific guidelines for a design. I like the idea of namebadges with the new logo. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	jbrewer (JEANETTEBREWER)	3 Jan 2006
To:	Stunt Engraver (DGL)	22 of 343

2602.22 In reply to 2602.18

Add us, please!

Roy Brewer
Jeanette Brewer
Randy Allen

Jeanette Brewer
ENGRAVING CONCEPTS (Epilog & Xenetech distributor)
Arlington, TX
www.engravingconcepts.com

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	jbrewer (JEANETTEBREWER)	23 of 343

2602.23 In reply to 2602.22
My pleasure. :-) Here's a list of forum members, we can look forward to meeting at the ARA Show: Peter & Kathy Vasic (Engraving Services Co.) Harvey & Dee Lentchner (Accent on Engraving) David Lavaneri (DGL Engraving) Mick Eminger (Cactus Equipment) Cody & Janna Stewart (Eternity Creations) Joe & Toni Hayes (Graphics Galore Inc.) Ed & Sharon Holley (Victor Valley Trophy Co.) Jeff & Lisa Higginbotham (TrophyUSA) A J Palik (Photon Graphics) Rolf & Leslie (Mountain Memories) Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Cody (BOBTNAILER)	3 Jan 2006
To:	Stunt Engraver (DGL)	24 of 343

2602.24 In reply to 2602.21

Do you have a vector file of the EE logo that's on this page? If so, I think that would be a wonderful way to recognize each other.

...it beats the way dogs do it...

From:	Harvey only (HARVEY-ONLY)	3 Jan 2006
To:	Cody (BOBTNAILER)	25 of 343

2602.25 In reply to 2602.24
I have a vector file of the logo, but will not be home again for at least a week. I believe I sent the complete package to David. Philadelphia, PA (Really Bensalem) Harvey's Tips Page When you finally understand it completely... it changes.

From:	laserman (MIKEMAC)	3 Jan 2006
To:	Stunt Engraver (DGL)	26 of 343

2602.26 In reply to 2602.8

David,

Of coarse we will be there hope to meet up with everyone again.

CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers.
2800 S. Main St.,Unit C
Santa Ana, Ca 92707
714-444-2385

From:	laserman (MIKEMAC)	3 Jan 2006
To:	Stunt Engraver (DGL)	28 of 343

2602.28 In reply to 2602.27
Treavor Hertel my Tech guy CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers. 2800 S. Main St.,Unit C Santa Ana, Ca 92707 714-444-2385

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	laserman (MIKEMAC)	29 of 343

2602.29 In reply to 2602.28

Thank you Mike.

I had forgotten Treavor's name. I remember speaking to Treavor, at trade shows, before he signed on with your company. Very impressive!

Heck of a tech. :-)

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 3 Jan 2006 by DGL

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	Cody (BOBTNAILER)	30 of 343

2602.30 In reply to 2602.24
Cody, This is embarrassing. Harvey did send the full compliment of EE logo formats to me, but I'm not finding them on my computer. :-$ David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	swede (BRUCE_LARSON)	3 Jan 2006
To:	ALL	31 of 343

2602.31
Last year we were too new and overwhelmed by the show that we did not get to meet anyone. This year will be different (although my checkbook may not survive--again). Add us in, Bruce and Packy Larson.

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	swede (BRUCE_LARSON)	32 of 343

2602.32 In reply to 2602.31

Bruce,

Please don't be bashful. All of us were once "too new" and I'm sure some of us are still overwhelmed by the show. :-)

Is there a company name you would like to appear next to your names?

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 4 Jan 2006 by DGL

From:	LaZerDude (C_BURKE)	3 Jan 2006
To:	Stunt Engraver (DGL)	33 of 343

2602.33 In reply to 2602.32
David, Here is a post from Peter Vasic from the "other" Vegas thread..... quote: Bright light city gonna set my soul, Gonna set my soul on fire........... Viva Las Vegas !!!!!!!! :D :D :-) If Peter is going to sing. I'm not coming. :D (insert laugh here) otherwise put me on the list..... and may I suggest Quarks on Friday the 3rd?

From:	Stunt Engraver (DGL)	3 Jan 2006
To:	LaZerDude (C_BURKE)	34 of 343

2602.34 In reply to 2602.33

OK Chuck,

We'll put you on the list for now, contingent upon Peter's hunka-hunka burnin' desire to sing. :-)

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 3 Jan 2006 by DGL

From:	LARRY (CENTURYBADGE)	4 Jan 2006
To:	Stunt Engraver (DGL)	36 of 343

2602.36 In reply to 2602.13

Hi,
Please put us on the list of members attending the ARA show in Vegas. Have attended the last two years and can't live without it.
Larry & Sandy Herman
Century Badge & Engraving, Inc.

PS: why don't we all wear a badge so we reconize each other.
something small like a small oval badge saying something.

LBH

From:	Harvey only (HARVEY-ONLY)	4 Jan 2006
To:	LARRY (CENTURYBADGE)	37 of 343

2602.37 In reply to 2602.36

I was thinking about the EE logo on top and the forum name underneath. For those who sublimate in color, for those who laser in greyscale, and for those who only rout a routed, (what else?), badge.

When I get home I will post the varius logos, unless David beats me to that. (It will be just under a week till I get home again.)

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.