ARA Las Vegas 2006 (The List) - Engraving Etc. Forum

From:	Russ (MEATSHAKE)	4 Jan 2006
To:	ALL	40 of 343

2602.40

Hi All,
I'm new to the forum and am about 99% sure that I am going to make it to the show. I might even be working it.

Joyce I would like to come by and see your shop. Being a newbie to laser engraving and sandcarving I want to learn all I can.

Please add me and my wife to the list.

Russ and Martha Warrick with WarrLight Engraving

Russ

Epilog 32EX 35 watt, A-Blast 36" Blasting cabinet, Freehand MX, PhotoShop CS, 15 years of Graphic Design

WarrLight Engraving

"Fast is fine, accurate is final. The real trick is learning how to take your time when you're in a hurry." -- Wyatt Earp

From:	Stunt Engraver (DGL)	4 Jan 2006
To:	Russ (MEATSHAKE)	41 of 343

2602.41 In reply to 2602.40
MeatShake, Hmmm...pardon me for not asking what that handle means. :-) In what capacity might you be working the show, if I may ask? In any event, here's the updated list of forum members, we can look forward to meeting at the ARA Show: Peter & Kathy Vasic (Engraving Services Co.) Harvey & Dee Lentchner (Accent on Engraving) David Lavaneri (DGL Engraving) Mick Eminger (Cactus Equipment) Cody & Janna Stewart (Eternity Creations) Joe & Toni Hayes (Graphics Galore Inc.) Ed & Sharon Holley (Victor Valley Trophy Co.) Jeff & Lisa Higginbotham (TrophyUSA) A J Palik (Photon Graphics) Rolf & Leslie (Mountain Memories) Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts) Mike Mackenzie & Treavor Hertel (CEM) Bruce and Packy Larson Chuck Burke (American Pacific Awards) Larry & Sandy Herman (Century Badge & Engraving, Inc.) Russ & Martha Warrick (WarrLight Engraving) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Engravin' Dave (DATAKES)	4 Jan 2006
To:	Russ (MEATSHAKE)	42 of 343

2602.42 In reply to 2602.40

Russ,

Welcome to Engraving Etc. You will find this group to be just as fun and friendly as the folks at the Cutting Edge. If your not careful you may learn a thing or two. I certainly have.
:D

EDITED: 4 Jan 2006 by DATAKES

From:	John (JOHNRMONTG)	5 Jan 2006
To:	Stunt Engraver (DGL)	43 of 343

2602.43 In reply to 2602.21

David ... as you no doubt remember, Anothony, formerly with Farro USA, generously provided us with beautiful pins that many of us lucky participants wore. I don't know if they would still be available or not but that worked out really well for me and I am sure the others..(even after working on the design and finally making a unique badge for the event!) that ultimately I liked a lot better and was very noticable to all that recognized them.

What do you think?

John
John & Alexa Montgomey
Lakeshore Engraving

From:	John (JOHNRMONTG)	5 Jan 2006
To:	Mick	45 of 343

2602.45 In reply to 2602.44
Hi Mick... well. Anthony struck out on his own, so to speak and has founded a marketing company. I can't remember what its called but he has a thread, I believe in the marketing folder you can look up. I am quite impressed with him and want to take him up on his latest offer of helping us out. I know our illustrius (sp?) leader, Stunt Engraver, David, has his company name/phone number available. John John & Alexa Montgomey Lakeshore Engraving

From:	Stunt Engraver (DGL)	5 Jan 2006
To:	John (JOHNRMONTG)	46 of 343

2602.46 In reply to 2602.43

John,

Yes, I remember the pins. Other than a nice way to recognize fellow EE members at the show, the pins made a nice commemorative piece.

I'll look into it.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 6 Jan 2006 by DGL

From:	Engravin' Dave (DATAKES)	5 Jan 2006
To:	Mick	47 of 343

2602.47 In reply to 2602.44
Take a look at his site in progress. Its under "Links" in the menu bar, under Marketing Consultants.

From:	Stunt Engraver (DGL)	6 Jan 2006
To:	John (JOHNRMONTG)	48 of 343

2602.48 In reply to 2602.43

John,

I'm assuming that you're attending the ARA show.

Naturally, "The List" is for entertainment purposes only, and doesn't represent a binding commitment, but would you like me to add your name to the list? :-)

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 6 Jan 2006 by DGL

From:	Rob (AWARDZZ)	6 Jan 2006
To:	ALL	49 of 343

2602.49

North East Ohio will be there!!!!

Rob Simpson
PlayAll Awards & Engraving
Ashtabula, OH
(on the snowy southern shores of Lake Erie)

Robert J. Simpson

PlayAll Awards & Engraving
Ashtabula, OH
(on the sunny southern shores of Lake Erie)

From:	LaZerDude (C_BURKE)	6 Jan 2006
To:	John (JOHNRMONTG)	50 of 343

2602.50 In reply to 2602.43
John, I still have my pin from last year. I'll be wearing it this year. Have you decided yet if you can make it?

From:	Stunt Engraver (DGL)	6 Jan 2006
To:	Rob (AWARDZZ)	51 of 343

2602.51 In reply to 2602.49
Rob, Happy to hear you'll be at the show. Here's the updated list of forum members, we can look forward to meeting at the ARA Show: Peter & Kathy Vasic (Engraving Services Co.) Harvey & Dee Lentchner (Accent on Engraving) David Lavaneri (DGL Engraving) Mick Eminger (Cactus Equipment) Cody & Janna Stewart (Eternity Creations) Joe & Toni Hayes (Graphics Galore Inc.) Ed & Sharon Holley (Victor Valley Trophy Co.) Jeff & Lisa Higginbotham (TrophyUSA) A J Palik (Photon Graphics) Rolf & Leslie (Mountain Memories) Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts) Mike Mackenzie & Treavor Hertel (CEM) Bruce and Packy Larson Chuck Burke (American Pacific Awards) Larry & Sandy Herman (Century Badge & Engraving, Inc.) Russ & Martha Warrick (WarrLight Engraving) Rob Simpson (PlayAll Awards & Engraving) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	John (JOHNRMONTG)	6 Jan 2006
To:	Stunt Engraver (DGL)	52 of 343

2602.52 In reply to 2602.48
Hi David... man, I am hoping I can make it but not really sure (kinda like last year). Go ahead and add me and I will keep you informed... Thanks for checking with me... John John & Alexa Montgomey Lakeshore Engraving

From:	Stunt Engraver (DGL)	6 Jan 2006
To:	John (JOHNRMONTG)	53 of 343

2602.53 In reply to 2602.52
John, I understand completely. It's not always easy to get away for the show. We'll put you down as a definite maybe. :-) Here's the updated list of forum members, we can look forward to meeting at the ARA Show: Peter & Kathy Vasic (Engraving Services Co.) Harvey & Dee Lentchner (Accent on Engraving) David Lavaneri (DGL Engraving) Mick Eminger (Cactus Equipment) Cody & Janna Stewart (Eternity Creations) Joe & Toni Hayes (Graphics Galore Inc.) Ed & Sharon Holley (Victor Valley Trophy Co.) Jeff & Lisa Higginbotham (TrophyUSA) A J Palik (Photon Graphics) Rolf & Leslie (Mountain Memories) Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts) Mike Mackenzie & Treavor Hertel (CEM) Bruce and Packy Larson Chuck Burke (American Pacific Awards) Larry & Sandy Herman (Century Badge & Engraving, Inc.) Russ & Martha Warrick (WarrLight Engraving) Rob Simpson (PlayAll Awards & Engraving) John & Alexa Montgomery (Lakeshore Engraving) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Rolf (RJB2108)	6 Jan 2006
To:	ALL	54 of 343

2602.54 In reply to 2602.50
I still have mine from last year too. I'll proudly wear it too !! I mean C'mon if someone sees this pin on me, they immidiatly know that I'm part of an elite group.

From:	Russ (MEATSHAKE)	6 Jan 2006
To:	ALL	55 of 343

2602.55

David,
I might be working in a booth doing sandcarving. I am also distributor for A Blast, a company that makes sandcarving equipment.

We do laser engraving and sandcarving. We do a good amount of wine bottles for the wineries in the area. We use our Epilog laser with Laser Tape on the bottles and then we sandcarve the bottles.

Russ

Epilog 32EX 35 watt, A-Blast 36" Blasting cabinet, Freehand MX, PhotoShop CS, 15 years of Graphic Design

WarrLight Engraving

"Fast is fine, accurate is final. The real trick is learning how to take your time when you're in a hurry." -- Wyatt Earp

From:	Stunt Engraver (DGL)	6 Jan 2006
To:	Russ (MEATSHAKE)	56 of 343

2602.56 In reply to 2602.55
Very nice Russ. We'll keep an eye out for you. quote: We do a good amount of wine bottles for the wineries in the area. Thank you for filling out your member profile information. The information prevented me from having to ask what area you're in. All the best, David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Rolf (RJB2108)	10 Jan 2006
To:	Russ (MEATSHAKE)	57 of 343

2602.57 In reply to 2602.55
Russ, What booth are you working? I like to talk to you to. I like to get a little more involved in Wine Bottles Rolf

From:	Stunt Engraver (DGL)	10 Jan 2006
To:	Rolf (RJB2108)	58 of 343

2602.58 In reply to 2602.57
Rolf, It's only my opinion, but I think you're already a little too involved with wine bottles. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	GBengraver	10 Jan 2006
To:	Stunt Engraver (DGL)	59 of 343

2602.59 In reply to 2602.23
Count us in: Bux-Mont Awards Greg Bencsik Debbie Koehler "Nothing is really work unless you would rather be doing something else."

Show messages: 1-19 20-39 40-59 60-79 80-99 100-119 … 340-343

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!