ARA Las Vegas 2006 (The List) - Engraving Etc. Forum

From:	Engravin' Dave (DATAKES)	15 Jan 2006
To:	Awardsguy	81 of 343

2602.81 In reply to 2602.80

Garry,

Welcome to the forum from a former Iowan. I know your turf very well. We usually stop for lunch in Clive to break up our family trips to and from Cedar Rapids, where most of my family still lives.

EDITED: 15 Jan 2006 by DATAKES

From:	Stunt Engraver (DGL)	15 Jan 2006
To:	Awardsguy	82 of 343

2602.82 In reply to 2602.80
Garry, Sounds like the salesman gave you a good tip. :-) Looking forward to meeting you in Las Vegas. Here's the updated list of forum members, we can look forward to meeting at the ARA Show: Peter & Kathy Vasic (Engraving Services Co.) Harvey & Dee Lentchner (Accent on Engraving) David Lavaneri (DGL Engraving) Mick Eminger (Cactus Equipment) Cody & Janna Stewart (Eternity Creations) Joe & Toni Hayes (Graphics Galore Inc.) Ed & Sharon Holley (Victor Valley Trophy Co.) Jeff & Lisa Higginbotham (TrophyUSA) A J Palik (Photon Graphics) Rolf & Leslie (Mountain Memories) Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts) Mike Mackenzie & Treavor Hertel (CEM) Bruce and Packy Larson Chuck Burke (American Pacific Awards) Larry & Sandy Herman (Century Badge & Engraving, Inc.) Russ & Martha Warrick (WarrLight Engraving) Rob Simpson (PlayAll Awards & Engraving) John & Alexa Montgomery (Lakeshore Engraving) Greg Bencsik & Debbie Koehler (Bux-Mont Awards) Zona & Steve Hudkins (Zona's Engraved Creations) Garry (AAA Awards & Embroidery) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Boz (CHEDDARHEAD)	16 Jan 2006
To:	ALL	84 of 343

2602.84
Hey, don't forget about us. Diane and Rob Bosworth of ACCESS Business Solutions, Inc. We haven't figured it all out yet, but we will be there. I think we are going to try to stay downtown this year. Seems like we have tired everything else, so why not downtown. Maybe next year will be Bullhead City. See you there. We'll be the good looking couple. Robert H. Bosworth ACCESS Business Solutions, Inc. Hudson, WI. 54016 (715) 386-8021 www.usedlasers.com

From:	Russ (MEATSHAKE)	16 Jan 2006
To:	Boz (CHEDDARHEAD)	85 of 343

2602.85 In reply to 2602.84
quote: We'll be the good looking couple. There is no conceit in your family, you have it all! Russ Epilog 32EX 35 watt, A-Blast 36" Blasting cabinet, Freehand MX, PhotoShop CS, 15 years of Graphic Design WarrLight Engraving "Fast is fine, accurate is final. The real trick is learning how to take your time when you're in a hurry." -- Wyatt Earp

From:	Stunt Engraver (DGL)	16 Jan 2006
To:	Boz (CHEDDARHEAD)	86 of 343

2602.86 In reply to 2602.84

Rob,

We'll keep an eye out for the two of you, although there's an extremely off-chance, there will be another good looking couple in town that week. :P

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
Greg Bencsik & Debbie Koehler (Bux-Mont Awards)
Zona & Steve Hudkins (Zona's Engraved Creations)
Garry (AAA Awards & Embroidery)
Diane & Rob Bosworth (ACCESS Business Solutions, Inc.)

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 16 Jan 2006 by DGL

From:	Becky (KIAIJANE)	16 Jan 2006
To:	Stunt Engraver (DGL)	87 of 343

2602.87 In reply to 2602.86
I'm not sure if you are adding vendors only to the list but I will be at the show (first time) and am looking forward to it. I would love to meet all of you and get together. If it's a vendors only kind of thing, I will see you at the show. Thanks Rebecca Leedy YNH Laser Graphics Company

From:	Stunt Engraver (DGL)	16 Jan 2006
To:	Becky (KIAIJANE)	88 of 343

2602.88 In reply to 2602.87

Rebecca,

By all means. Come one, come all! The current list is a mix of vendors and "regular" people as well. :-)

Looking forward to seeing you there.

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 16 Jan 2006 by DGL

From:	Cody (BOBTNAILER)	16 Jan 2006
To:	Becky (KIAIJANE)	90 of 343

2602.90 In reply to 2602.89

You can usually recognize a fellow member by the goofy smile on their face. If that doesn't work, we have a secret greeting: three cartwheels, followed by a loud "hooty whoo!".

;-)

There's been some talk about a nametag design just for EE members, but nothing's been finalized yet.

From:	Stunt Engraver (DGL)	16 Jan 2006
To:	Becky (KIAIJANE)	92 of 343

2602.92 In reply to 2602.89

Rebecca,

We haven't formalized a badge design. Last year, a few of us just made our own.

Faro USA furnished some nice pewter pins that we wore during the show. The pins were handed out at the Faro USA booth, which "forced" us to look at their offerings, which, by the way, were quite nice. :-)

I'll see if we can arrange something with Faro USA this year.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 16 Jan 2006 by DGL

From:	Harvey only (HARVEY-ONLY)	16 Jan 2006
To:	Stunt Engraver (DGL)	93 of 343

2602.93 In reply to 2602.92

I finally got home.

Here are the EE logos. One for drag engraving, one for routing, a cloor one and a b/w one.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	Harvey only (HARVEY-ONLY)	16 Jan 2006
To:	Cody (BOBTNAILER)	96 of 343

2602.96 In reply to 2602.95

plt is Hewlett Packard Plotter Language. Most modern engravers import this file. Corel Draw does also.

CMX is Corel Metafile Xchange, (I saved them in version 5, older version). Most graphics programs can import this file, it is native of Corel so that can import it also.

I can convert it to any format that Corel can export.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	Zonas	17 Jan 2006
To:	Cody (BOBTNAILER)	97 of 343

2602.97 In reply to 2602.90

Is that a challenge ;-) Are we only official members if we can do the "three cartwheels, followed by a loud "hooty whoo!"?? You know David likes a challenge...........that's why he's the "Stunt Engraver". :-)

Zona
Zona's Engraved Creations

From:	Cody (BOBTNAILER)	17 Jan 2006
To:	Stunt Engraver (DGL)	100 of 343

2602.100 In reply to 2602.98

I would agree.

My cartwheel-turning days are most assuredly past, and any attempt to revisit those days would be good entertainment for you, and a certain trip to the ER for me.

Maybe we should take that part out of the greeting....