ARA Las Vegas 2006 (The List) - Engraving Etc. Forum

From:	Stunt Engraver (DGL)	16 Jan 2006
To:	Becky (KIAIJANE)	92 of 343

2602.92 In reply to 2602.89

Rebecca,

We haven't formalized a badge design. Last year, a few of us just made our own.

Faro USA furnished some nice pewter pins that we wore during the show. The pins were handed out at the Faro USA booth, which "forced" us to look at their offerings, which, by the way, were quite nice. :-)

I'll see if we can arrange something with Faro USA this year.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 16 Jan 2006 by DGL

From:	Harvey only (HARVEY-ONLY)	16 Jan 2006
To:	Stunt Engraver (DGL)	93 of 343

2602.93 In reply to 2602.92

I finally got home.

Here are the EE logos. One for drag engraving, one for routing, a cloor one and a b/w one.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	Stunt Engraver (DGL)	16 Jan 2006
To:	Harvey only (HARVEY-ONLY)	94 of 343

2602.94 In reply to 2602.93
Thanks Harvey. What's a cmx file? David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	16 Jan 2006
To:	Cody (BOBTNAILER)	96 of 343

2602.96 In reply to 2602.95

plt is Hewlett Packard Plotter Language. Most modern engravers import this file. Corel Draw does also.

CMX is Corel Metafile Xchange, (I saved them in version 5, older version). Most graphics programs can import this file, it is native of Corel so that can import it also.

I can convert it to any format that Corel can export.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	Zonas	17 Jan 2006
To:	Cody (BOBTNAILER)	97 of 343

2602.97 In reply to 2602.90

Is that a challenge ;-) Are we only official members if we can do the "three cartwheels, followed by a loud "hooty whoo!"?? You know David likes a challenge...........that's why he's the "Stunt Engraver". :-)

Zona
Zona's Engraved Creations

From:	Stunt Engraver (DGL)	17 Jan 2006
To:	Zonas	98 of 343

2602.98 In reply to 2602.97
Zona, I surely enjoy a challenge, but I'll have to admit, at this stage in my life, I'm only good for the "hooty-whoo!" :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Awardsguy	17 Jan 2006
To:	JHayes55	99 of 343

2602.99 In reply to 2602.83
It was the gentleman from Universal Laser Sytems. Don't know if that's your guy. Garry Knapp AAA Awards & Embroidery Clive, IA

From:	Cody (BOBTNAILER)	17 Jan 2006
To:	Stunt Engraver (DGL)	100 of 343

2602.100 In reply to 2602.98

I would agree.

My cartwheel-turning days are most assuredly past, and any attempt to revisit those days would be good entertainment for you, and a certain trip to the ER for me.

Maybe we should take that part out of the greeting....

From:	Stunt Engraver (DGL)	17 Jan 2006
To:	Cody (BOBTNAILER)	101 of 343

2602.101 In reply to 2602.100
OK Cody, We'll remove the cartwheel requirement. The vote of two makes it a landslide decision. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Boz (CHEDDARHEAD)	17 Jan 2006
To:	ALL	102 of 343

2602.102
"Hooty-Whoo!" Y'all. So you are already changing the salutation. Great. Here I can barely sit after insisting that we learn the new salutation so we can at least fit in with one group. I believe I am suffering from an EE injury. I never was very good at somersaults, much less be able to do a cartwheel. So I hollered "hooty-whoo!" , surveyed my landing site and let er rip. I forgot that I was a little larger than my drivers license states. So as I was entering the third cartwheel, I ran out of flight deck, pitched off the terraced hillside, and came to a crash landing 30 ft. down the embankment tangled up in a woodpile next to the firepit. Don't worry, I should be able to shuffle along by the end of February. So as I said before, we'll be the good looking couple with one of us shuffling along like Tim Conway. Robert H. Bosworth ACCESS Business Solutions, Inc. Hudson, WI. 54016 (715) 386-8021 www.usedlasers.com
EDITED: 17 Jan 2006 by CHEDDARHEAD

From:	jeanettebrewer (JEANETTEBREWER2)	17 Jan 2006
To:	Stunt Engraver (DGL)	103 of 343

2602.103 In reply to 2602.94

Dave,

The kind folks at Epilog Laser have offered to provide special EE badges for everyone to put on their ARA nametags.

Wanna take them up on their offer?

Jeanette Brewer ENGRAVING CONCEPTS (formerly Brewer Sales) Epilog & Xenetech Distributor www.engravingconcepts.com

From:	Harvey only (HARVEY-ONLY)	17 Jan 2006
To:	jeanettebrewer (JEANETTEBREWER2)	104 of 343

2602.104 In reply to 2602.103
That sounds like a wonderful offer. They need to be big enough for even me to see. [I think I need new glasses or eyes.] Philadelphia, PA (Really Bensalem) Harvey's Tips Page When you finally understand it completely... it changes.

From:	jeanettebrewer (JEANETTEBREWER2)	17 Jan 2006
To:	Harvey only (HARVEY-ONLY)	105 of 343

2602.105 In reply to 2602.104

Great! We'll take care of it!

Perhaps you or our fearless leader will have a better idea on how to communicate this to everyone but for now, I'll just say ...

Stop by the Epilog Laser booth (#477) to get your "EE Badge of Honor" ;-)

I'm guessing that anyone/everyone at the Epilog booth will know where the pins/badges will be ... but if not, just look for me (the shortest one in the booth) and I'll take care of you!

Jeanette Brewer
ENGRAVING CONCEPTS
(formerly Brewer Sales)
Epilog & Xenetech Distributor
www.engravingconcepts.com

From:	Stunt Engraver (DGL)	17 Jan 2006
To:	jeanettebrewer (JEANETTEBREWER2)	107 of 343

2602.107 In reply to 2602.103
Jeanette, Sounds great. Thank you and thank you Epilog. Not to look a gift horse in the mouth, but will we have a say in the design of the badge? I'm assuming the badge will be laser engraved. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	UncleSteve	17 Jan 2006
To:	Stunt Engraver (DGL)	108 of 343

2602.108 In reply to 2602.107
"Tis better to look a gift horse in the mouth than suffer the OTHER end!" :P "Genius ain't anything more than elegant common sense." Josh Billings

From:	Stunt Engraver (DGL)	17 Jan 2006
To:	UncleSteve	109 of 343

2602.109 In reply to 2602.108
Steve, Ahhh, maybe so...but by now, Epilog knows we're a discerning crowd. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	jeanettebrewer (JEANETTEBREWER2)	17 Jan 2006
To:	Stunt Engraver (DGL)	110 of 343

2602.110 In reply to 2602.107
Of course you'll have a say. I'll send you an email to start a dialog. Jeanette Brewer ENGRAVING CONCEPTS (formerly Brewer Sales) Epilog & Xenetech Distributor www.engravingconcepts.com

From:	Stunt Engraver (DGL)	17 Jan 2006
To:	jeanettebrewer (JEANETTEBREWER2)	111 of 343

2602.111 In reply to 2602.110
Thank you Jeanette. Prishyateit :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

Show messages: 1-11 … 32-51 52-71 72-91 92-111 112-131 132-151 152-171 … 332-343

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!