What is C V V 2? - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	Harvey only (HARVEY-ONLY)	23 Jun 2006
To:	Cindy (CINDYM)	23 of 27

2792.23 In reply to 2792.22

It all depends on your processor company.

We happen to have a different supplier for the two locations, one requires the manual input of the last four digits of the card, the other does not.

Philadelphia, PA (Really Bensalem)

When you finally understand it completely... it changes.

From:	Joe (SMITTY61)	1 Feb 2007
To:	Trophyman	24 of 27

2792.24 In reply to 2792.21
Our machine asks for the "V" code. It is the last 4 numbers on the back of the card. Joe Smith Dan Kain Trophies, Inc. 2207 N. Pershing Drive Arlington, VA 22201 703.525.8100 (ph) 703.525.9155 sales@dankain.com

From:	Engravin' Dave (DATAKES)	1 Feb 2007
To:	Joe (SMITTY61)	25 of 27

2792.25 In reply to 2792.24

Joe,

You are correct, but the number on the back of the card could be 3 or 4 numbers.

EDITED: 4 Jul 2010 by DATAKES

From:	Joe (SMITTY61)	1 Feb 2007
To:	Engravin' Dave (DATAKES)	26 of 27

2792.26 In reply to 2792.25

Yep... The last 3 or 4 numbers on the back is the "V" code.

Thanks for clarifying that :>

Joe Smith
Dan Kain Trophies, Inc.
2207 N. Pershing Drive
Arlington, VA 22201
703.525.8100 (ph)
703.525.9155
sales@dankain.com

From:	Ron (RBENNETT)	8 Apr 2007
To:	Rob (AWARDZZ)	27 of 27

2792.27 In reply to 2792.7
Robert, I have a Meistergram 1912 with an extra controller for parts. Would you be interested in purchasing it? It runs fine. I do not have any software so I have been running it off Engravelab. I am located in Ann Arbor Mich.

Show messages: 1-2 3-22 23-27

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats