Preferred Supplier Banner Ads - Engraving Etc. Forum

From:	Mr. Science (SEANWEIR)	5 Jul 2006
To:	Stunt Engraver (DGL)	106 of 179

3670.106 In reply to 3670.105

Thanks David, we didin't get too many hits from that banner, but we'll run another one sometime in the near future.

Thanks again!

Sean

Sean Weir
CerMark Laser Marking Matls.
Ferro Corp.
251 West Wylie Ave.
Washington, PA 15301
(724) 229-5161

From:	Stunt Engraver (DGL)	5 Jul 2006
To:	Mr. Science (SEANWEIR)	107 of 179

3670.107 In reply to 3670.106

Sean,

Since June is over, I'll be removing the current banner.

Looking forward to placing your future offer.

Thanks again,

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 5 Jul 2006 by DGL

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	ALL	108 of 179

3670.108

Ooops! The ad I posted, for Custom Markers and Memorials was a mockup.

I've taken it down until we get the final say on Byron's offer.

Sorry. :-$

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 8 Jul 2006 by DGL

From:	sprinter	8 Jul 2006
To:	Stunt Engraver (DGL)	109 of 179

3670.109 In reply to 3670.108

David,

Have you checked with the advertisers to see if the members are actually using the prefered vendors?

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	sprinter	110 of 179

3670.110 In reply to 3670.109

Ken,

Not individually. Sean, from Cermark says his "June Special" didn't generate much response.

We can only lead the forum members to water. :-)

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 8 Jul 2006 by DGL

From:	sprinter	8 Jul 2006
To:	Stunt Engraver (DGL)	111 of 179

3670.111 In reply to 3670.110
Just curious, I talked to a few of them and they are saying the same as what Sean said. I was thnking about adding that feature but I'm not sure of the true value to the members or advertisers.

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	sprinter	112 of 179

3670.112 In reply to 3670.111

Ken,

None of them can say they aren't getting their money's worth. :-)

We can post the banners, but it's up to the suppliers to "sell the sizzle" in the advertising folder, to keep the forum members aware of their generous offers.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 8 Jul 2006 by DGL

From:	AnthonyC	8 Jul 2006
To:	sprinter	114 of 179

3670.114 In reply to 3670.113
Hey David, If my memory and my old expense account serves me correctly, most of the members here don't drink water... Sorry couldn't resist! I'll get back to work now Anthony www.ultimate-marketing-solutions.com

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	AnthonyC	115 of 179

3670.115 In reply to 3670.114
Anthony, I realize that you avoid drinking water, but I don't think you can speak for all of us. Well, you can speak for Chuck Burke and myself. :-) Hope all is well with you and your family. All the best, David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA
EDITED: 8 Jul 2006 by DGL

From:	AnthonyC	8 Jul 2006
To:	Stunt Engraver (DGL)	116 of 179

3670.116 In reply to 3670.115
That reminds me of the old bumper sticker "Drink beer, Fish pis..." Never mind. Family are all good Thanks for asking PS FYI Chuck can't drink! www.ultimate-marketing-solutions.com

From:	Mike (MIKEN)	8 Jul 2006
To:	Stunt Engraver (DGL)	117 of 179

3670.117 In reply to 3670.115
David: I am attaching the artwork for my ad. Hopefully I've sized it properly and given you what you need. Thanks Mike Dist. of LAZER Cutting Grid St. Louis Laser, Inc. www.stl-laser.com
EDITED: 27 Jul 2006 by MIKEN

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	Mike (MIKEN)	118 of 179

3670.118 In reply to 3670.117
You're up and running Mike. Good luck! David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Mike (MIKEN)	8 Jul 2006
To:	Stunt Engraver (DGL)	119 of 179

3670.119 In reply to 3670.118
David: Thanks very much-now would you mind changing it? I used an old logo. Don't you hate dealing with amateurs. Sorry. Mike Dist. of LAZER Cutting Grid St. Louis Laser, Inc. www.stl-laser.com
EDITED: 8 Jul 2006 by DGL

From:	Stunt Engraver (DGL)	8 Jul 2006
To:	Mike (MIKEN)	120 of 179

3670.120 In reply to 3670.119

Mike,

I made the change. That should be better.

Thanks again.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 8 Jul 2006 by DGL

From:	Mike (MIKEN)	8 Jul 2006
To:	Stunt Engraver (DGL)	121 of 179

3670.121 In reply to 3670.120
David: Thanks, Mike Dist. of LAZER Cutting Grid St. Louis Laser, Inc. www.stl-laser.com
EDITED: 8 Jul 2006 by MIKEN

From:	logojohn	8 Jul 2006
To:	ALL	122 of 179

3670.122 In reply to 3670.109
Some people may have an interest but not quite ready yet. Or they might make a note and come back when there is a request from a customer. There are several I may be interested in later on but don't have time to do right now. I have ideas and samples from months ago and still trying to find time to get them on display. .

From:	Carl (CSEWELL)	8 Jul 2006
To:	logojohn	123 of 179

3670.123 In reply to 3670.122
I agree with LogoJohn. I also have more samples than time, but I will get to them. I requested the samples from Big Sky Woodcrafters and was very impressed. I guess I need to tell them that! I don't have a need today because I have plenty of wood plaques in stock. However, it gave me a great opportunity to run comparisons and I'll be keeping Big Sky on the top of my supplier list for wood plaques. Is their June special still valid? Hmmmm..... it doesn't say "limit one per customer". I also ordered through Wooden Nickel which I probably wouldn't have done if they weren't listed on the forum. I will order from them again. Carl Guntersville Laser Engraving Guntersville, AL http://www.guntersvillelaser.com

From:	Stunt Engraver (DGL)	9 Jul 2006
To:	Carl (CSEWELL)	124 of 179

3670.124 In reply to 3670.123
Carl, BSW's June special has been extended through July. No mention of "one per customer", but I would assume that to be the case. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	lasergeek	9 Jul 2006
To:	ALL	125 of 179

3670.125 In reply to 3670.109
Great response to the banner so far - better than what I can usually expect from a 1/6-1/8 mag ad - and it actually generates sales, rather than just requests for more information. Don't (wink wink) let the industry mags catch wind of this!!! hahaha Sean Noland A&B Supply and Design, LLC 360.652.8056 ~ 360.652.8056 Fax www.absupplydesign.com

Show messages: 1-5 … 46-65 66-85 86-105 106-125 126-145 146-165 166-179

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!