Rowmark's New Metalgraph - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	LARRY (CENTURYBADGE)	12 Oct 2006
To:	logojohn	22 of 25

5052.22 In reply to 5052.9
Hi , I purchased the vintage gold per your recomendation. We are on our third pass with the laser and still not clean. What do you recomend we run it at and how many passes. We have a 40 watt unit. Larry LBH

From:	Peter	12 Oct 2006
To:	ALL	23 of 25

To our mates at Rowmark,

You know blokes....You make a great range of products.....
I'd be hard pressed to use other brands ahead of Rowmark....

But...What on Earth is going on ?

Who's butt needs to be kicked here ?

B-)

regards
Peter

Peter Vasic
Engraving Services Co.
Adelaide, Australia.
http://www.engravingservices.com.au

From:	logojohn	13 Oct 2006
To:	LARRY (CENTURYBADGE)	24 of 25

5052.24 In reply to 5052.22
I only have done a couple with our new 40 watt so don't have tweaked settings yet. I started at 30 speed and adjusted it a little on the fly. I think it took 4-5 passes but was busy doing other things so just kept repeating to just get it done. it was the 1/16 thick so I didn't want to overdo it and warp it.

Message 5052.25 was deleted

Show messages: 1 2-21 22-25

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats