Folder Show & Tell GalleryAcrylic Plaque

Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  Griffo (LASERWEST) 14 Oct 2006 
 To:  Stunt Engraver (DGL)  5 of 7 
5080.5 In reply to 5080.4 

Harvey.
Thanks for the tip I'll keep that in mind as I've had trouble elsewhere.
I've just updated

David:
Thanks for making it easy.


James: Nice work and NICE TIP.

Thanks again guys. This really is a great site, it has helped me tremendously

Regards
Dave
 

Previous
Next
 From:  Mike (MIKEN) 14 Oct 2006 
 To:  James (TILER02)  6 of 7 
5080.6 In reply to 5080.5 
James
Very nice work. Would you mind sharing your secrets for doing such a nice color fill.

Mike
Dist. of Lazer Cutting Grid
www.stl-laser.com
 

Previous
 From:  James (TILER02) 16 Oct 2006 
 To:  Mike (MIKEN)  7 of 7 
5080.7 In reply to 5080.6 
Mike, There is not really any trick to the color fill. Make sure the engraving is pretty deep then using a piece of cardboard I spread the paint on, let it dry then remove mask. If I need it to dry quick I put it back in the laser with the exaust running. This dries it quick.
 
 
     
 

Show messages: All  1-4  5-7

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2025 Project Beehive Forum

Forum Stats