Good mornng,
I am new to your board, recommend by a member.
I have someone looking at a part that we need hot stamped and IF they aren't able to do it, is there anyone here who would be interested?
The company I work for has some Polycarbonate dials with the numbers and indices marks raised very little. The dial is 3" in diam. and the numbers etc. are about 2 3/4" in Diam. It is about 3/8" thick.
We used to do our own hot stamping but our machine broke down and they took the stamping off of everything but this part. It will take a flat heat plate to stamp them. We can furnish the holding fixture but it is about 2 inches tall. We can also furnish the foil.
If there is anyone who wold be interested, please let me know and if you want to talk to me about it, call me at 800-872-7832, ext. 195 or email dford@s-tec.com . I will be here weekdays until about 3:00 PM, CST, or you can email me at home after hours or on the weekends at donford@cox.net.
God Bless You
Don |