Folder Tools & EquipmentGeo. Knight DK20S - Watch Your Fingers

Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  logojohn 17 Jun 2006 
 To:  Stunt Engraver (DGL)  121 of 123 
1514.121 In reply to 1514.120 
With the laser toner transfer, I see some possibilities with some very thick items. (4-6 inches)

Would the DC16 be more flexible? It has several attachments you can add later like mugs, inside plates, caps, etc. The list price is actually less than the DK20.

http://www.heatpress.net/pdf/dc.pdf

We have a small 9x12 hobby which does do a good job on a lot of things but I see the need to upgrade in size down the road. The way things happen around here it could be next year or next week depending on what comes up.

If you order a DK20 now from a dealer, is there any way to be sure you are getting the new model?

'
trophiesinc.com

EDITED: 17 Jun 2006 by LOGOJOHN
 

Previous
Next
 From:  Stunt Engraver (DGL) 17 Jun 2006 
 To:  logojohn  122 of 123 
1514.122 In reply to 1514.121 
quote:
If you order a DK20 now from a dealer, is there any way to be sure you are getting the new model?


John,

That's a good question, since some of the (new) older presses may still be in circulation.

If it's one of the "new build", the handle, in full open position, will be parallel to the bed of the press.

Older builds were random. Some had sufficient space between the handle and housing and some had little to none.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA
 

Previous
 From:  Harvey only (HARVEY-ONLY) 17 Jun 2006 
 To:  logojohn  123 of 123 
1514.123 In reply to 1514.121 
Look into the new Insta press for that. A little more expensive but has a crank at the top that adjusts the space for thick items. Insta makes good presses.

Philadelphia, PA (Really Bensalem)

When you finally understand it completely... it changes.
 
 
     
 

Show messages:  1-20  …  61-80  81-100  101-120  121-123

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2024 Project Beehive Forum

Forum Stats