http://www.pbase.com/wlhuber/light_box_light_tent

Thank you for the above link. I am posting this for future search purposes.

light box PVC pipe elbows sheet back drop picture photographing home made

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

I made one before I saw the plans but it came out pretty close in concept.
I just used a big piece of plywood 2'x4' as the base and added 4 upright 2x4s in the corners and then connected them with other 2x4's at the top to stabilize it.

I had to make it tall since I have some 3' trophies and 18" plaques. The top can be covered or left open for the real tall stuff.

I used big 3' wide strips of thin white foam we have for packing for the light diffuser but I use the bed sheets for part of it now since I saw the plans.

Our asi dept. also bought a nice systems at the camera store for smaller stuff.

It folds up flat like a briefcase for storage and unfolds into about a 2' cube with a white backdrop and light diffuser sides. It even came with 2 lamps and a tall and short camera tripod all for around $100. One thing this doesn't have is a front with a whole to shoot the picture through. This is only a problem if you are doing highly reflective things like crystal or silver trays.

.