Ikon Metal - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	Rodney Gold (RODNEY_GOLD)	8 Mar 2006
To:	ALL	4 of 6

3110.4
Do a google search on "cold casting",if it's the same compond , this stuff is easy to make yourself and can be used for many other things (EG , laser engrave acrylic as a female and use it to make metal male" castings. ) Requires almost no investment barring some resin and metal powder. Pour some on a level piece of acrylic , build a small dam to contain the flow let it cure and flip it out and hey prestio , you have your own version.

From:	Harvey only (HARVEY-ONLY)	8 Mar 2006
To:	Rodney Gold (RODNEY_GOLD)	5 of 6

3110.5 In reply to 3110.4

This sounds like a perfect item for you to do an article on.

The details will be helpful to our members, [and me].

Take some photos and I will whip up your text and photos up to a PDF file.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	GBengraver	8 Mar 2006
To:	Rodney Gold (RODNEY_GOLD)	6 of 6

3110.6 In reply to 3110.4

Rodney,
You never cease to amaze me with your depth of knowlege on any subject that comes up here.

I am always impressed and somewhat jealous. ;-)

We are very lucky to have you on board.

Thanks for taking your valuable time to chime in here.

Greg

"Nothing is really work unless you would rather be doing something else."

EDITED: 8 Mar 2006 by GBENGRAVER

Show messages: All 1-3 4-6

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats