Looking for small rotary - Engraving Etc. Forum

From:	Button (LASERCHICK)	17 Mar 2006
To:	ALL	1 of 13

3217.1
We are looking for a small rotary engraver that is portable, could be taken to shows, sporting events, etc. If anyone has one one they are looking to get rid of for a good deal, please let me know. Tracy Anderson www.catchthemoment.us www.ldscharms.com

From:	Cap'n Ron (RONSTROWGER)	5 Apr 2006
To:	Button (LASERCHICK)	2 of 13

3217.2 In reply to 3217.1
What is small? I have a 1313 Xenetech with all the attatchments, cutters and chip removal system. Has less than 80 hours of runtime and is two years old. I closed my engraving business. 8500.00 Sincerely, Ron Strowger

From:	Ralph (RHOUGHTON)	22 May 2006
To:	Button (LASERCHICK)	3 of 13

3217.3 In reply to 3217.1
Not sure if you found what you were looking for, but I have three machines available and lots of templates. http://people.albion.edu/rhoughto/PDF/Engraving/default.htm I have one old GT for diamond drag only, one small TX which has a motor and will do flat sign and plare work only. I also have a third newer machine for diamond work only. Can send pictures if you want - make offer on them. Thanks, Ralph Template engraver. Computer graphics specialty.

From:	Tom Franklin (FLEA)	22 May 2006
To:	Button (LASERCHICK)	4 of 13

3217.4 In reply to 3217.1

Hi,

You should find all you need at Laird Equipment Co.
www.lairdequipment.com/

Best of luck,
Tom Franklin (flea)
www.reptom.com

From:	Dee (DEENA-ONLY)	22 May 2006
To:	Button (LASERCHICK)	5 of 13

3217.5 In reply to 3217.1

Hi
Are you looking for a manual or computer machine? If you are looking for a computer style then check with Roy Brewer at Engraving Concepts and see if they have anything they have taken as a trade in. There is a banner ad running for them on this forum. For compactness You may want to look for a Dahlgren Wizard XL but make sure you get someone on this forum to tell you the good and the bad.

Dee

Philadelphia, PA (Really Bensalem)

From:	laserman (MIKEMAC)	24 May 2006
To:	Tom Franklin (FLEA)	6 of 13

3217.6 In reply to 3217.4

Is this the one and only Tom Franklin that I have know for years? I have a good friend named Tom Franklin who lives in Florida.

I am just curious if this is the same Tom?

CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers.
2800 S. Main St.,Unit C
Santa Ana, Ca 92707
714-444-2385

From:	Tom Franklin (FLEA)	24 May 2006
To:	laserman (MIKEMAC)	7 of 13

3217.7 In reply to 3217.6

Hi Mike,

Guilty as charged. :-)
It was great to share a couple of minutes with you in Las Vegas.
I hope all is well. I continue to have the highest respect for you...you are aces!!

Warm regards,
Tom

www.reptom.com

From:	laserman (MIKEMAC)	24 May 2006
To:	Tom Franklin (FLEA)	8 of 13

3217.8 In reply to 3217.7

I knew it was you Tom, I am glad to see you have joined the forum family.

Hope you and the family are all well if you ever need anything just let me know.

CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers.
2800 S. Main St.,Unit C
Santa Ana, Ca 92707
714-444-2385

From:	JD (JIMDOW)	25 May 2006
To:	Button (LASERCHICK)	10 of 13

3217.10 In reply to 3217.1

Hi Tracy,
There are two good options if you want to get a new engraver with a warranty. One is the New M20 from Gravograph - it is about 20lbs and engraves in a 4"x4" area with a pen attachment. It also has a red spotting beam and auto Z ajust. You can get it for under $5K. Second, if you need a bigger engraving area, there is the M40 with an 8"x12" engraving area and they now come with a deep vise for 4 1/2" of Z clearance to hold bigger items. Again, it has the red spotting beam and the auto Z. I weighs aporx. 55lbs. You can get that for under $7K.

Yes, I work for Gravograph-New Hermes and have done so for over 15 years up here in Minnesota. I don't know what town you live in, but if you have any questions about our stuff, please let me know.

Cordially,
Jim Dow
Territory Manager
Gravograph-New Hermes :-)

From:	Harvey only (HARVEY-ONLY)	25 May 2006
To:	Button (LASERCHICK)	11 of 13

3217.11 In reply to 3217.1

The red spotting beam is a valuable addition to the machines, it makes pointing to an oddball shape very easy.

I am waiting for a retrofit for the IS400. I would love it.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	John (JGRIBBIN)	4 Feb 2007
To:	Button (LASERCHICK)	12 of 13

3217.12 In reply to 3217.1

I have a Roland EGX-300. In New condition. If you are interested let me know.

John
208-704-1426
jgribbin27@adelphia.net

From:	Button (LASERCHICK)	4 Feb 2007
To:	John (JGRIBBIN)	13 of 13

3217.13 In reply to 3217.12
Thanks, but we purchased one last year. If we do have a need in the future, I will keep you in mind. Tracy Anderson www.catchthemoment.us www.ldscharms.com