Comments - Engraving Etc. Forum

Computers/ Peripherals/ Software Comments

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	chris (CORDINA)	27 Mar 2006
To:	ALL	1 of 8

3323.1
Is there a way in corel (I have X3) to add comments so the next time I open that file I know what settings I used. Like what my laser was set at or what font I had used, When fonts are changed to curves that info is not kept. Basically a place I can keep notes for myself so I have them all in one place for the next time. Thanks

From:	logojohn	27 Mar 2006
To:	chris (CORDINA)	2 of 8

3323.2 In reply to 3323.1
Not positive but I think anything not within the page size will not print or laser. .

From:	UncleSteve	27 Mar 2006
To:	chris (CORDINA)	3 of 8

3323.3 In reply to 3323.1
You should be able to add a layer and put your info on that. Then hide the layer when printing or during your work on the image. "Genius ain't anything more than elegant common sense." Josh Billings

From:	BrianC (INKSQUIRTER)	27 Mar 2006
To:	chris (CORDINA)	4 of 8

3323.4 In reply to 3323.1
Another option is when saving a drawing, when you click save as go down to options and it will give a "notes" box for saving information. problem is when you open the drawing this will disappear. Brian

From:	Harvey only (HARVEY-ONLY)	27 Mar 2006
To:	chris (CORDINA)	5 of 8

3323.5 In reply to 3323.1

The way I do it is to add a layer, then click on the printer icon for that layer to make it a non-printing layer. Select that layer and put the text there.

Then the text always shows but does not print.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

Message 3323.6 was deleted

From:	chris (CORDINA)	28 Mar 2006
To:	ALL	7 of 8

3323.7
Thank you to all. I like the add notes to a page and disable the print and the notes when saving. Ill try those two and see which seems most natural.

From:	Bieb (HABIEB)	31 Mar 2006
To:	chris (CORDINA)	8 of 8

3323.8 In reply to 3323.1

Chris, I just put them on the page or outside the page in Cyan or another color that I don't normally use.

Harold

www.southeastlaserengraving.com
Atlanta, Georgia

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats