Error when Editing - Engraving Etc. Forum

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	ALL	1 of 26

3402.1

I continue to have problems when trying to go back and edit posts....Ocasionally I won't get this error, but 99% of the time...I do.

Any help (other than a suggestion of no mistakes) would be appreciated....

Thanks,

Brian Genrich

Rallye Productions Inc.
1-800-236-2036 x112
Custom cut, or sheet stock Sublimatable metal,
Screen printing, and other digital print services.

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	2 of 26

3402.2 In reply to 3402.1

Dogone it.....Thought I had the attachment under 50 kb.....I would edit it....BUT I CANT!!!!!!

>.<

Thanks,

Brian Genrich

Rallye Productions Inc.
1-800-236-2036 x112
Custom cut, or sheet stock Sublimatable metal,
Screen printing, and other digital print services.

From:	Stunt Engraver (DGL)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	3 of 26

3402.3 In reply to 3402.2
Brian, No problem on the file size. I'll send your screen shot to John Fish. Anyone else having this problem when editing posts? David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	logojohn	3 Apr 2006
To:	Stunt Engraver (DGL)	4 of 26

3402.4 In reply to 3402.3

I used to get an error if I tried to use preview when editing but it would work if I just applied it without a preview.

I just kept doing it that way. But it seems to work with the previw now when I just tested it.

EDITED: 3 Apr 2006 by LOGOJOHN

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	Stunt Engraver (DGL)	5 of 26

3402.5 In reply to 3402.3
It could be a Mozzilla issue......... Thanks, Brian Genrich Rallye Productions Inc. 1-800-236-2036 x112 Custom cut, or sheet stock Sublimatable metal, Screen printing, and other digital print services.

From:	Mick	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	6 of 26

3402.6 In reply to 3402.5

Hi Brian
I use Mozilla
Mick

This edited fine.

Mick
Cactus Equipment & Supplies
800-440-6847

EDITED: 3 Apr 2006 by MICK

From:	Stunt Engraver (DGL)	3 Apr 2006
To:	ALL	7 of 26

3402.7
I've sent Brian's screen shot to John Fish. He'll either join the discussion, or I'll post his reply, when he gets back to me. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Stunt Engraver (DGL)	3 Apr 2006
To:	ALL	8 of 26

3402.8
Here's the response I received from John Fish: There are a number of characters that are considered hazardous in that they could be used to pass malicious code so they are blocked. The person must be trying to use one of these characters, it doesn't mean they are necessarily trying to pass code (hack), but if I allow those characters then it opens a vulnerability. At least I THINK this is what is causing this error by the line of code referred to.... If I knew more about what is being done before the error (the exact text in the message, or this happens when they do ..... ) I could make a more exact guess. John ==================================================== David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	Stunt Engraver (DGL)	9 of 26

3402.9 In reply to 3402.8
The first post in this thread causes that error.... I wonder if it's my sig line.....Come to think of it....That may be the culprit. I will remove it for this post and test. Thanks, Brian Edited to add See it works.....
EDITED: 3 Apr 2006 by RALLYGUY1

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	10 of 26

3402.10 In reply to 3402.9

That's the ticket.......

Here is a copy of the code for my sig......

<div class="sig">Thanks,

Brian Genrich

Rallye Productions Inc. 
1-800-236-2036 x112 
Custom cut, or sheet stock Sublimatable metal, 
Screen printing, and other digital print services. </div>

Let me know what needs to be removed, and I will remove it.

Or I could just dump the sig altogether. :)

Thanks,

Brian G.

EDITED: 3 Apr 2006 by RALLYGUY1

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	Dave Jones (DAVERJ)	12 of 26

3402.12 In reply to 3402.11

I would have to post several times then.......

I will try that if it isn't obvious to John Fish based on the code that he see's.

I can always delete the whole thread then if it's just all my posts.

Thanks for the suggestion Dave.

Brian

From:	Stunt Engraver (DGL)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	13 of 26

3402.13 In reply to 3402.10
Brian, I'll send that info to John, to determine what, if anything, needs to be removed. Getting closer to the solution. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	RALLYGUY (RALLYGUY1)	3 Apr 2006
To:	Stunt Engraver (DGL)	14 of 26

3402.14 In reply to 3402.13
Yup....looks like we are close to nailin it. Thanks for the quick responses.... Thanks, Brian Genrich Rallye Productions Inc. 1-800-236-2036 x112 Custom cut, or sheet stock Sublimatable metal, Screen printing, and other digital print services.

From:	John (ICTJOHN)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	15 of 26

3402.15 In reply to 3402.14

Brian,

I know absolutely nothing about the coding needed, but yours looks totaly different than mine

here is what my coding looks like:

John 
<a href="http://www.creative-awards.com">http://www.creative-awards.com</a> 
<a href="mailto:creativeawards@msn.com"><a href="mailto:creativeawards@msn.com"><a href="mailto:creativeawards@msn.com"><a href="mailto:creativeawards@msn.com">creativeawards@msn.com</a></a></a></a>

John
http://www.creative-awards.com
creativeawards@msn.com

From:	Stunt Engraver (DGL)	3 Apr 2006
To:	RALLYGUY (RALLYGUY1)	16 of 26

3402.16 In reply to 3402.14

Brian,

John Fish didn't spot anything unusual in your signature code. He said those kinds of glitches can be "conditional."

We just don't know what those exact conditions could be.

If the problem persists, I'd suggest "throwing darts" at variations of the signature, until the error message doesn't appear.

Not a cure; just a suggestion. :-$

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 3 Apr 2006 by DGL

From:	Stunt Engraver (DGL)	4 Apr 2006
To:	RALLYGUY (RALLYGUY1)	18 of 26

3402.18 In reply to 3402.17
Brian, I hate to see you go without a signature altogether. Why not add the components, incrimentally, until you figure out what the offending code was? David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	4 Apr 2006
To:	RALLYGUY (RALLYGUY1)	20 of 26

3402.20 In reply to 3402.10

Try this instead.

<div class="sig">Thanks,
Brian Genrich
Rallye Productions Inc.
1-800-236-2036 x112 
Custom cut, or sheet stock Sublimatable metal, 
Screen printing, and other digital print services. </div>

I took out the weird and changed it to instead. It looks good in Dreamweaver.

Even with HTML disabled it is altering my post. The way to do it is whereever there is a " " replace it with " "

Now lets see if it allows this edit to stay.

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

EDITED: 4 Apr 2006 by HARVEY-ONLY