navigate and cadlink - Engraving Etc. Forum

From:	Bill (ALBILLBERT)	9 Apr 2006
To:	ALL	1 of 11

3477.1

Silly question... what is the Navigate: button used for.. also. do we have a area for cadlink or engravelab users..

Bert

EDITED: 9 Apr 2006 by DGL

From:	Harvey only (HARVEY-ONLY)	10 Apr 2006
To:	Bill (ALBILLBERT)	2 of 11

3477.2 In reply to 3477.1
This is the proper place. Philadelphia, PA (Really Bensalem) Harvey's Tips Page When you finally understand it completely... it changes.

From:	Bill (ALBILLBERT2000)	10 Apr 2006
To:	Harvey only (HARVEY-ONLY)	3 of 11

3477.3 In reply to 3477.2
guess I didnt make myself clear.... with engravelab/cadlink other than searching thru posts... could there be a topic area for cadlink users... and.. as to the nagavite button on the bottom right.. I am not kidding.. I dont know what it is used for.. Help..

From:	Stunt Engraver (DGL)	10 Apr 2006
To:	Bill (ALBILLBERT2000)	4 of 11

3477.4 In reply to 3477.3

Al, Bert, Bill, (haven't determined your name:)

If you're asking for a separate folder, dedicated to Cadlink/Engravelab, with enough demand, we can set that up.

If demand isn't high, this would be the most appropriate folder.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 10 Apr 2006 by DGL

From:	Bill (ALBILLBERT2000)	10 Apr 2006
To:	Stunt Engraver (DGL)	5 of 11

3477.5 In reply to 3477.4

Thanks.. I wasn't sure if there was an area for that topic. I do understand demand.. .. also.. again.. what is the nagavite button used for in the bottom left of this site..

and sorry for so many names.. I should just keep my name as Bill....when i registered.. I wasn't thinking..

signed
Bill

From:	Dave Jones (DAVERJ)	10 Apr 2006
To:	Bill (ALBILLBERT2000)	6 of 11

3477.6 In reply to 3477.5
quote: what is the nagavite button used for in the bottom left of this site. If you mean where it says Navigate: 1.1 GO That is where you can type in the number of a discussion and jump straight to it. For example, this message is in reply to your message 3477.5 (thread number 3477, post #5) so by entering that number in there you can navigate directly to that message.

From:	Bill (ALBILLBERT2000)	10 Apr 2006
To:	Dave Jones (DAVERJ)	7 of 11

3477.7 In reply to 3477.6
ahhhhh thanks.. see you can teach an old dog new tricks... lol.. Thanks

From:	Stunt Engraver (DGL)	10 Apr 2006
To:	Bill (ALBILLBERT2000)	8 of 11

3477.8 In reply to 3477.5

Bill,

Use as many names as you want. I'll settle on Bill, for the sake of our conversations. :-)

The Corel Draw folder was created, due to the many questions that arose over use of the program.

If Cadlink/Engravelab becomes a "hot topic" we'll certainly consider adding a separate folder.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 10 Apr 2006 by DGL

From:	Semi-Accurate Engraver (LONEHAWK)	18 Apr 2006
To:	Stunt Engraver (DGL)	9 of 11

3477.9 In reply to 3477.8

Um....I must be bling or something; but I don't see any navigate button anywhere. :-$

I use Win 98 SE. Is this why I'm not seeing it? Also, I use Netscape 7.2 (it's last version of Netscape with own Email client, don't like MS outlook) Could that be it? Or is it option #1, that I'm blind as a bat? :S

=====================
Take care and God bless.

Tony K. "The Semi-Accurate Engraver"

"If Time flies when you're having fun, how does it get around when you're bored?!"

From:	Stunt Engraver (DGL)	18 Apr 2006
To:	Semi-Accurate Engraver (LONEHAWK)	10 of 11

3477.10 In reply to 3477.9
Tony, If you scroll to the bottom of the left-hand column of the Topic Folders field, you should see a "Navigate box" along with a search area. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Semi-Accurate Engraver (LONEHAWK)	19 Apr 2006
To:	Stunt Engraver (DGL)	11 of 11

3477.11 In reply to 3477.10
Ah ok. Thank you sir. So it "was" option #1. I'm as blind as a bat. It's a wonder I ever get a job right! >.< ===================== Take care and God bless. Tony K. "The Semi-Accurate Engraver" "If Time flies when you're having fun, how does it get around when you're bored?!"

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!