OEM Wall Mural - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	Stunt Engraver (DGL)	12 May 2006
To:	(Brian) (MOSTLY_HERE)	11 of 14

3669.11 In reply to 3669.9
Brian, The process Mick used, was OEM toner, from a laser printer, onto a special transfer paper, which was then heat transferred to the (garden variety) ceramic tile. Mick is a vendor for the special transfer paper and can tell you more about the printer etc. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Peter	13 May 2006
To:	ALL	12 of 14

3669.12

why not spray them with a two pack clear coating, simply to make them totally washable/ scrubbable, waterproof and UV stable ?

regards
Peter

PS...the tiles are breathtaking ! B-)

Peter Vasic
Engraving Services Co.
Adelaide, Australia.
http://www.engravingservices.com.au

EDITED: 13 May 2006 by PETER

From:	Mick	13 May 2006
To:	(Brian) (MOSTLY_HERE)	13 of 14

3669.13 In reply to 3669.9

Brian
I use the OKI 5200 to decorate ceramic tiles, glass, wood, tumbled stone and most plastics. It works VERY well for full color name badges also.
Call me and I can send samples.

Mick Eminger
Cactus Equipment & Supplies
800-440-6847

Mick
Cactus Equipment & Supplies
www.cactus-equipment.com
800-440-6847

EDITED: 13 May 2006 by MICK

From:	(Brian) (MOSTLY_HERE)	13 May 2006
To:	Stunt Engraver (DGL)	14 of 14

3669.14 In reply to 3669.11
Thanks Dave, I have not gotten into any special printing areas of the biz and I thought you needed to have special sublimation printers and such. Good to know a few other options are out there. Brian(Mostly_Here) Las Vegas (Sin City) Good decisions come from experience, and experience come from, well bad decisions...

Show messages: All 1-10 11-14

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats