A custom piece - Engraving Etc. Forum

From:	LaZerDude (C_BURKE)	25 May 2006
To:	ALL	1 of 22

3935.1

Hi Gang......

I HAD to show you this.......dimensions on this about 18" top to bottom and 30" wide.....made from solid Koa an increasingly rare tropical wood found mostly on the Big Island of Hawaii.
It was a challenge to create, but I learned a lot. The NEXT one will not be had for the price this one was had..
Anyway, thank you for letting me brag a bit.

EDITED: 26 Jul 2006 by C_BURKE

From:	geebeau	25 May 2006
To:	LaZerDude (C_BURKE)	2 of 22

3935.2 In reply to 3935.1

Impressive!!!

Sfeve

Steve
Custom ID & Awards

From:	Stunt Engraver (DGL)	25 May 2006
To:	LaZerDude (C_BURKE)	3 of 22

3935.3 In reply to 3935.1

Very nice, Chuckster!

You don't find that type of thing in a catalog; which are exactly the areas where you'll find your most lucrative inroads.

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 25 May 2006 by DGL

From:	LaZerDude (C_BURKE)	25 May 2006
To:	geebeau	4 of 22

3935.4 In reply to 3935.2
Thank you.

From:	LaZerDude (C_BURKE)	25 May 2006
To:	Stunt Engraver (DGL)	5 of 22

3935.5 In reply to 3935.3
Thank you.

From:	UncleSteve	25 May 2006
To:	LaZerDude (C_BURKE)	6 of 22

3935.6 In reply to 3935.1
Beautiful piece of wood and a very nice job on it.... B-) "Genius ain't anything more than elegant common sense." Josh Billings

From:	Engravin' Dave (DATAKES)	25 May 2006
To:	LaZerDude (C_BURKE)	7 of 22

3935.7 In reply to 3935.1
Nice work! You've come a long way baby.

From:	Harvey only (HARVEY-ONLY)	25 May 2006
To:	LaZerDude (C_BURKE)	8 of 22

3935.8 In reply to 3935.4

And you were worried that you would not really get the hang on the laser. HAH.

This picture for you B-)

Philadelphia, PA (Really Bensalem)

Harvey's Tips Page When you finally understand it completely... it changes.

From:	John (JOHNRMONTG)	25 May 2006
To:	LaZerDude (C_BURKE)	9 of 22

3935.9 In reply to 3935.5
Great Job Chuck ... you go boy! John John & Alexa Montgomey Lakeshore Engraving

From:	JHayes55	26 May 2006
To:	LaZerDude (C_BURKE)	10 of 22

3935.10 In reply to 3935.1
That is very, very nice. Good work buddy. Did you do the wood work or do you have someone your working with? Joe

From:	Funkmeister (FUNKY)	26 May 2006
To:	LaZerDude (C_BURKE)	11 of 22

3935.11 In reply to 3935.4

The plaques is awsome. But the other thing in the picture needs a little work.

Just kidding. Really awsome DUDE B-) B-) B-) B-) B-)

From:	LaZerDude (C_BURKE)	26 May 2006
To:	JHayes55	12 of 22

3935.12 In reply to 3935.10
quote: Did you do the wood work or do you have someone your working with? Joe Joe, Thank you. I did the wood work.

From:	LaZerDude (C_BURKE)	26 May 2006
To:	Funkmeister (FUNKY)	13 of 22

3935.13 In reply to 3935.11
quote: But the other thing in the picture needs a little work. Tell me about it. ( insert laugh here)

From:	LipChip	26 May 2006
To:	LaZerDude (C_BURKE)	14 of 22

3935.14 In reply to 3935.1
Great work Chuck. Now when are you going to get back on "Skype"? David L. Vernon Lip Chip Solutions, Inc. www.LipChip.com 818-363-8132

From:	Bob (BOBBELT)	26 May 2006
To:	LaZerDude (C_BURKE)	15 of 22

3935.15 In reply to 3935.14
LQQks really good Chuck. I can only hope to do so well. Bob

From:	Peter	26 May 2006
To:	Stunt Engraver (DGL)	16 of 22

3935.16 In reply to 3935.3

Hi Chuck,
Thats a really nice piece of timber. Now I think David is right with his remark. You will do well to think outside the square with your ideas.

Unique = desirable = name your price.

regards
Peter :-)

Peter Vasic
Engraving Services Co.
Adelaide, Australia.
http://www.engravingservices.com.au

From:	jeanettebrewer (JEANETTEBREWER2)	26 May 2006
To:	LaZerDude (C_BURKE)	17 of 22

3935.17 In reply to 3935.1

Chuck,

Great job! You've come a long way since your visit to Texas!!!

Jeanette Brewer
ENGRAVING CONCEPTS
(formerly Brewer Sales)
Epilog & Xenetech Distributor
www.engravingconcepts.com

From:	Rob (AWARDZZ)	26 May 2006
To:	ALL	18 of 22

3935.18

Looking Good Chuck!!!... not bad for a hula guy

Rob
Ashtabula, OH

Robert J. Simpson

PlayAll Awards & Engraving
Ashtabula, OH
(on the sunny southern shores of Lake Erie)

From:	UCONN Dave & Lynn too (DANDL48)	27 May 2006
To:	LaZerDude (C_BURKE)	19 of 22

3935.19 In reply to 3935.1

Chuck,

Real, real nice!! Good job my man.

Does the shape represent any of the Islands or is that how the tree grew?

Did you get my PM?

Dave

Born at night, just not last night.

From:	Cody (BOBTNAILER)	27 May 2006
To:	ALL	20 of 22

3935.20

That was Chuck in the picture??? I didn't recognize him without the skirt... ;-)

Just kidding, my friend. That was very impressive.

And to think...David Takes said that you had no talent. Just for the record, I didn't believe him.

Hehehehe...of course, he didn't really say that, but it was fun to think it. :D

Keep up the great work!!

Show messages: 1-20 21-22

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!