New Groundbreaking Twist - Engraving Etc. Forum

From:	Engravin' Dave (DATAKES)	12 Oct 2006
To:	ALL	1 of 43

5079.1
Are you tired of the same old plated shovels for groundbreaking gifts? Below is a picture of a gift we created for an upcoming road project groundbreaking. I was able to drill and tap the scale model dozers, making them easy to securely mount on custom bases made by Studio Workshop.
EDITED: 12 Oct 2006 by DATAKES

From:	Harvey only (HARVEY-ONLY)	12 Oct 2006
To:	Engravin' Dave (DATAKES)	2 of 43

5079.2 In reply to 5079.1
You must have done that while I was 'dozing'. Now you let the 'Cat' out of the bag. Philadelphia, PA (Really Bensalem) When you finally understand it completely... it changes.

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	Harvey only (HARVEY-ONLY)	3 of 43

5079.3 In reply to 5079.2
Harvey, There are probably people here, that wish you hadn't "plowed" that ground. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	12 Oct 2006
To:	Stunt Engraver (DGL)	4 of 43

5079.4 In reply to 5079.3
Duck, here comes BratDawg. Philadelphia, PA (Really Bensalem) When you finally understand it completely... it changes.

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	Harvey only (HARVEY-ONLY)	5 of 43

5079.5 In reply to 5079.4
Harvey, If that's the "Case" get out the "shovel." David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	12 Oct 2006
To:	Stunt Engraver (DGL)	6 of 43

5079.6 In reply to 5079.5
'I Can Dig It.' Philadelphia, PA (Really Bensalem) When you finally understand it completely... it changes.

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	Harvey only (HARVEY-ONLY)	7 of 43

5079.7 In reply to 5079.6
Harvey, Next thing you know, we'll receive a "John Deere" letter. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Mick	12 Oct 2006
To:	Stunt Engraver (DGL)	8 of 43

5079.8 In reply to 5079.7
One of Peters friends from Vegas showed up here in Junction, I told her (You better go "Back Ho") Mick Cactus Equipment & Supplies www.cactus-equipment.com 800-440-6847

From:	Dave Jones (DAVERJ)	12 Oct 2006
To:	Stunt Engraver (DGL)	9 of 43

5079.9 In reply to 5079.7
Another thread that is down to "earth. Moving" as it may be, I wonder if the mention of dozing is "bull".

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	Mick	10 of 43

5079.10 In reply to 5079.8
Mick, Evidently they took you seriously. I saw someone named "Skip Loader" back onto the bus. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	Dave Jones (DAVERJ)	11 of 43

5079.11 In reply to 5079.9
Dave, Could be, but I doubt we'll see very many people trying to "crane" their necks, to see what's happeened to this thread. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	BratDawg	12 Oct 2006
To:	Harvey only (HARVEY-ONLY)	13 of 43

5079.13 In reply to 5079.4
quote: Duck, here comes BratDawg. You missed the proper punctuation Harv...there should have been an "excavation" point! Steve :-)

From:	Stunt Engraver (DGL)	12 Oct 2006
To:	BratDawg	14 of 43

5079.14 In reply to 5079.12
Steve, I knew it wouldn't take you long to "tread" on this topic. :-) David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	BratDawg	12 Oct 2006
To:	Stunt Engraver (DGL)	15 of 43

5079.15 In reply to 5079.14
David, You know it's hard to pass these up....but just to make myself "clear"...I wasn't trying to be "pushy" :-) Steve

From:	Mike (MIKEN)	12 Oct 2006
To:	Engravin' Dave (DATAKES)	16 of 43

5079.16 In reply to 5079.15
Dave, Back to your original and quite clever solution and post. May I suggest you hire a band for the groundbreaking. I recommend one we had back in Columbus called "Phil Dirt and the Dozers". Mike Dist. of Lazer Cutting Grid www.stl-laser.com

From:	gt350ed	12 Oct 2006
To:	Engravin' Dave (DATAKES)	17 of 43

5079.17 In reply to 5079.1
Thanks for the "scoop". You are a cool Cat;a pillar of our community. B-) Ed Holley Victor Valley Trophy & Awards Co. and Coffee Mugs Online www.coffeemugsonline.com

From:	PenTrophy (PENINSULATROPHY)	12 Oct 2006
To:	Engravin' Dave (DATAKES)	18 of 43

5079.18 In reply to 5079.1

Dave thanks for the view. good work!!

Now you will need more "horsepower" to " winch" this topic out of the mud. A real "crawler" if you ask me. Much longer and we will have to "trac" down the real "hitch point" to this discussion.....

We need someone to "sprocket" this topic up a knotch and "extend" it's longevity before David lowers the "boom" and "scraps" the whole "undercarraige"

....
...
..
.
Mark
In the Great Northwest!

EDITED: 12 Oct 2006 by PENINSULATROPHY

From:	Harvey only (HARVEY-ONLY)	12 Oct 2006
To:	ALL	19 of 43

5079.19
I knew I should not have started this. I knew I should not have started this. I knew I should not have started this. I knew I should not have started this. I knew I should not have started this. Philadelphia, PA (Really Bensalem) When you finally understand it completely... it changes.

From:	PenTrophy (PENINSULATROPHY)	12 Oct 2006
To:	Harvey only (HARVEY-ONLY)	20 of 43

5079.20 In reply to 5079.19
You hit the "starter button" on the head so now you will have to wait for the "big diesel" to crawl to a stop or the forks to "dig in". .... ... .. . Mark In the Great Northwest!

Show messages: 1-20 21-40 41-43

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!