Direct Printing on Silk - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	Stunt Engraver (DGL)	17 Nov 2006
To:	Jim (PUZZLEHEAD)	5 of 6

5353.5 In reply to 5353.4
Jim, The large format Epson printers are actually made by Mutoh. Knowing that all techs aren't created equal, maybe a second opinion from a Mutoh tech, would shed some light on the problem. Just guessing, but I would suspect a buildup of silk fiber on the printheads could be caused by static electricity. The good news is, even if the silk printing operation doesn't pan out, there are plenty of opportunities in large format printing. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	18 Nov 2006
To:	Jim (PUZZLEHEAD)	6 of 6

5353.6 In reply to 5353.4

Are you sure it was silk fibers and not sizing?

As I said before, silk is very long fibers, maybe a yard long or more. The only way to get tiny scraps is by cutting the fabric.

Try using a lint roller first to remove any tramp surface material whatever it really is.

Philadelphia, PA (Really Bensalem)

When you finally understand it completely... it changes.

Show messages: All 1-4 5-6

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats