Hula Birthday - Engraving Etc. Forum

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	JHayes55	6 of 26

5580.6 In reply to 5580.1
Joe, Thank you so much. I just got my sorry carcass out of bed and after some coffee will head to the beach. Looking forward to seeing you and Toni in Vegas.

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Barbara (RGILE)	7 of 26

5580.7 In reply to 5580.2
Barbara, Thank you for your birthday wishes... I most certainly shall.

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	jeanettebrewer (JEANETTEBREWER2)	8 of 26

5580.8 In reply to 5580.3

Jeanette,

Thank you. I most certainly will. We might go on a photo safari around the island with my spiffy new Nikon that Santa brought.

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Rob (AWARDZZ)	9 of 26

5580.9 In reply to 5580.4
Rob, Thank you so much for your birhtday wish. While I am not a former Canuck, I DID live in Edmonton Alta. for 8 years. Winters were pretty harsh up there.....Brrrrrrrrrrrrrrrr

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Harvey only (HARVEY-ONLY)	10 of 26

5580.10 In reply to 5580.5
Harvery, Thank you. I most certainly will.

From:	John (JOHNRMONTG)	26 Dec 2006
To:	LaZerDude (C_BURKE)	11 of 26

5580.11 In reply to 5580.6
Happy Birthday big guy! Take lots of great shots! John John & Alexa Montgomey Lakeshore Engraving

From:	Stunt Engraver (DGL)	26 Dec 2006
To:	LaZerDude (C_BURKE)	12 of 26

5580.12 In reply to 5580.8
Happy Birthday Chuckster! Looking forward to seeing some photos from the Nikon. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	Harvey only (HARVEY-ONLY)	26 Dec 2006
To:	LaZerDude (C_BURKE)	13 of 26

5580.13 In reply to 5580.6

Thank you so much. I just got my sorry carcass out of bed and after some coffee will head to the beach.

Haven't you been following the threads? The Beach is closed. (devil)

Philadelphia, PA (Really Bensalem)

When you finally understand it completely... it changes.

From:	LipChip	26 Dec 2006
To:	LaZerDude (C_BURKE)	14 of 26

5580.14 In reply to 5580.7
Happy b-day Chuck. I imagine your going to take some photos with your camera when Rodney visits. We will be awaiting your photo postings. David L. Vernon Lip Chip Solutions, Inc. www.LipChip.com 818-363-8132 ICI Imagedata / Pictaflex 3D Vacumn Press / Agent & Dealer

From:	Peter	26 Dec 2006
To:	ALL	15 of 26

5580.15

happy Boithday Chuckmeister.

from sunny Perth :-)

Peter Vasic
Engraving Services Co.
Adelaide, Australia.
http://www.engravingservices.com.au

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	John (JOHNRMONTG)	16 of 26

5580.16 In reply to 5580.11
quote: Happy Birthday big guy! Take lots of great shots! John, Thank you. It will be awhile before I get any great shots....lots to learn on this camera. Not you average point and shoot that is for sure. BUT I DID get ONE great one of my dalmation of Christmas day. I'll post that after I tweak it a bit. Thank you again.

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Stunt Engraver (DGL)	17 of 26

5580.17 In reply to 5580.12
quote: Happy Birthday Chuckster! Looking forward to seeing some photos from the Nikon. Thanks David. I think Robyn and I will be exhcanging a few emails before we see anything approaching great, but I will try. Thanks again.

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Harvey only (HARVEY-ONLY)	18 of 26

5580.18 In reply to 5580.13
quote: Haven't you been following the threads? The Beach is closed. (devil) Why didn't you tell me that BEFORE I got sunburned? (devil) B-)

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	LipChip	19 of 26

5580.19 In reply to 5580.14

David,
Thank you for the birthday wishes. Yes, I am sure I will try and get a photo or two while Rodney is here. If I do and they are any good I'll post a few. HEY! Perhaps I can get Rodney to show me a trick or two if he has time. HEHEH ( insert laugh here)

Thanks again David and Happy New Year!

From:	LaZerDude (C_BURKE)	26 Dec 2006
To:	Peter	20 of 26

5580.20 In reply to 5580.15
Peter, Thank you for the kind wishes. I hope you and Kathy ( and the rest of your family ) are enjoying your holiday. When are you coming here?

From:	gt350ed	27 Dec 2006
To:	LaZerDude (C_BURKE)	21 of 26

5580.21 In reply to 5580.20
Hey, dude!! Throw some Ahi on the laser in celebration of your birthday, kay? You remember how to get it flamin, right? :P Otherwise, hava HAPPY BIRTHDAY!! Ed Holley Victor Valley Trophy & Awards Co. and Coffee Mugs Online www.coffeemugsonline.com

From:	UncleSteve	27 Dec 2006
To:	gt350ed	22 of 26

5580.22 In reply to 5580.21
WOW! Can you REALLY brand Ahi with the laser? Do ya do it before or after you cook it? Sounds like it's patent time!!!!!! "Don't believe everything you think!"

From:	LaZerDude (C_BURKE)	27 Dec 2006
To:	UncleSteve	23 of 26

5580.23 In reply to 5580.22

It's a long and complicated process requiring many levels of different settings.

We could tell you, but then we'd have to kill you.

B-)

From:	Dave Jones (DAVERJ)	27 Dec 2006
To:	LaZerDude (C_BURKE)	24 of 26

5580.24 In reply to 5580.23
You mean your laser doesn't have a power setting for "sear". ...Dave Dave Jones Design

From:	UncleSteve	27 Dec 2006
To:	Dave Jones (DAVERJ)	25 of 26

5580.25 In reply to 5580.24
Sear? It doesn't even have "rare" "medium" and "well done" !! :/ It DOES, however, have chop, grind and slice..... ;-) "Don't believe everything you think!"

Show messages: 1-5 6-25 26

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!