Any Cermark tips? - Engraving Etc. Forum

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	Tom (TJGEENEN)	11 Jan 2007
To:	ALL	1 of 6

5727.1
I am getting my first batch of Cermark next week and was just wondering if there are any tips to using the stuff. I ordered the Cermark for glass. Thanks Tom Geenen Gulf Coast Laser Graphics

From:	Laser Image (LASER_IMAGE)	11 Jan 2007
To:	Tom (TJGEENEN)	2 of 6

5727.2 In reply to 5727.1

Tom,
If you do a search for "cermark glass" you will get 1898 hits. There is a wealth of info in there that should start you on your way.

Gary

edit: make sure you select "from beginning of time"

EDITED: 11 Jan 2007 by LASER_IMAGE

From:	LaZerDude (C_BURKE)	11 Jan 2007
To:	Tom (TJGEENEN)	3 of 6

5727.3 In reply to 5727.1
Tom, Did you buy the spray can or the "bulk" cermarc? I have tried both and prefer the bulk cermarc as it is easy to mix, gives better coating and has a longer shelf life. Of course it makes an airbrush a necessity.

From:	Tom (TJGEENEN)	11 Jan 2007
To:	ALL	4 of 6

5727.4
Chuck, I bought the bulk stuff. Thanks Gary, I should have know there would be a bunch of info on the board already. Thanks for your help guys. Tom Geenen Gulf Coast Laser Graphics

From:	JHayes55	13 Jan 2007
To:	Tom (TJGEENEN)	5 of 6

5727.5 In reply to 5727.4
Tom - there is quite a bit of info on the Thermark/CerMark website. http://www.thermark.com/ I have not yet played with the CerMark for glass, although I have a fair amount of the CerMark for SS over the last few years. I would love to hear about your experiences as you start your learning curve on the glass product. Joe

From:	Tom (TJGEENEN)	14 Jan 2007
To:	JHayes55	6 of 6

5727.6 In reply to 5727.5
Hi Joe, It should be here Monday so I will post an update on how it goes. Thanks Tom Geenen Gulf Coast Laser Graphics

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats