Folder Laser - Power/Substrate SettingsRiver Rock Setting

Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  Barbara (RGILE) 2 Feb 2007 
 To:  BobT  3 of 6 
5940.3 In reply to 5940.2 
Thank you Bob,
I will try that setting. I was going to use 6.5 for speed, but maybe 10 will be enough.
Thanks again
Barb

Barbara Sample
RGile Engravers
 

Previous
Next
 From:  Bieb (HABIEB) 5 Feb 2007 
 To:  BobT  4 of 6 
5940.4 In reply to 5940.2 

What size are the rocks?

Harold

www.southeastlaserengraving.com
Atlanta, Georgia
 

Previous
Next
 From:  BobT 5 Feb 2007 
 To:  ALL 5 of 6 
5940.5 
Usually oblong or oval, anywhere from 6 to 8 inches in length. I usually get to choose and look for the flat ones so focus is easier.
 

Previous
 From:  Barbara (RGILE) 7 Feb 2007 
 To:  Barbara (RGILE)  6 of 6 
5940.6 In reply to 5940.3 
HI Bob,
I did the Rock and it came out very nice. I used your setting of 100Power and 10 speed and went over it two time. I then spray with gold spray paint, but cleanup was a little difficult.
I went over it after taking off the tape, and some of the paint got a little dull.
It still looks good though. I just have a hard time cleaning it up.
Thanks again for helping me. Now I know how to do it. Just have to get better and cleaning it up after taking off the tape.
Barb

Barbara Sample
RGile Engravers
 
 
     
 

Show messages: All  1-2  3-6

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2024 Project Beehive Forum

Forum Stats