Folder Comp. Mechanical Engraving/CNCCopper Engraving

Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  Andrew 16 Feb 2007 
 To:  Stunt Engraver (DGL)  15 of 16 
6050.15 In reply to 6050.11 
The vinyl is a good tip. I've even used wide pieces of masking tape and gotten away with it
but something more durable, such as vinyl, would inspire more confidence. .


Hi David

the vinyl also serve a dual purpose for me . If I am say engraving a 100 tags, I will lay a tacky mat on my bed, then a matrix made from a sheet of flexible plastic that I have routed out the shapes of the brass tags. Lay out the tags and then place the Vinyl on top. Sounds a bit of an ordeal but it works really well when deep engraving the brass.

My wife isn't impressed with the gold vinyl that I seem to trail everywhere - perhaps its time to use a new colour!
 

Previous
 From:  Stunt Engraver (DGL) 16 Feb 2007 
 To:  Andrew  16 of 16 
6050.16 In reply to 6050.15 
quote:
My wife isn't impressed with the gold vinyl that I seem to trail everywhere - perhaps its time to use a new colour!


Still using those Autumn colors. I don't blame your wife. :-)

David "The Stunt Engraver" Lavaneri
DGL Engraving
Port Hueneme, CA

EDITED: 16 Feb 2007 by DGL
 
 
     
 

Show messages: All  1-14  15-16

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2024 Project Beehive Forum

Forum Stats