Adhesive Transfer Applicator by Scotch

From:	Betty	24 Feb 2007
To:	ALL	1 of 13

6135.1

I have an almost new Scotch #752 Adhesive Transfer Applicator for sale. I used it with for sublimation metals.

I am asking $30 (includes almost full adhesive). I will pay shipping to anywhere in the contential US.

contact me at tss002001@yahoo.com

Betty

From:	John (JOHNRMONTG)	24 Feb 2007
To:	Betty	2 of 13

6135.2 In reply to 6135.1

Betty ... what is an adhesive transfer applicator? Do you have a picture or more specifically, what are its capabilities? Or do you have a link to where you bought it? I am wondering if it would work for tiles and applying an adhesive so I could apply a cork backing to them.

Thanks

John
John & Alexa Montgomey
Lakeshore Engraving

From:	Harvey only (HARVEY-ONLY)	24 Feb 2007
To:	John (JOHNRMONTG)	3 of 13

6135.3 In reply to 6135.2
The ATG gun takes a roll of adhesive and release tape and transfers the adhesive only to the item, no carrier in the middle. The 3M product in 10 mil has a grab you will not believe. Philadelphia, PA (Really Bensalem) When you finally understand it completely... it changes.

From:	John (JOHNRMONTG)	25 Feb 2007
To:	Betty	5 of 13

6135.5 In reply to 6135.4
Harvey & Betty ... thanks so much for your responses! John John & Alexa Montgomey Lakeshore Engraving

From:	LaZerDude (C_BURKE)	26 Feb 2007
To:	John (JOHNRMONTG)	7 of 13

6135.7 In reply to 6135.2
quote: I am wondering if it would work for tiles and applying an adhesive so I could apply a cork backing to them. John, I think you would have a difficult time applying a cork backing to tiles period, due to the irregularity of the backs of the tiles themselves. With that said, have you tried contact cement or a spray adhesive?

From:	Mick	26 Feb 2007
To:	LaZerDude (C_BURKE)	8 of 13

6135.8 In reply to 6135.7
Cork that comes with an acrylic adhesive works excellent on tiles, we have used it for years. Mick Cactus Equipment & Supplies www.cactus-equipment.com 800-440-6847

From:	Harvey only (HARVEY-ONLY)	27 Feb 2007
To:	Betty	9 of 13

6135.9 In reply to 6135.6

I already have two, but that is a great price for the ATG gun alone.

The beauty is that there is no backing to peel and that it applies adhesive only. A 10 mil ATG tape will hold almost anything, it is 10 mil adhesive.

If you buy 10 mil double sided tape you get about 4 mil adhesive/2 mil carrier/4 mil adhesive. You would be amazed at what the true 10 mil adhesive from 3M can hold. (You will never get a piece of brass off an item without destroying the brass. You can get a brass plate off with a bit of trouble with the normal tapes. This stuff is permanent.)

Philadelphia, PA (Really Bensalem)

When you finally understand it completely... it changes.

From:	John (JOHNRMONTG)	27 Feb 2007
To:	LaZerDude (C_BURKE)	10 of 13

6135.10 In reply to 6135.7

Hi Chuck .... yes, I have tried contact cements and various sprays that have worked with mixed sucess. Still continuing the search for the 'ultimate spray'. Say, how was 'vegas? I bet you had a great time!

Mick ... for several years I was able to purchase cork with an adhesive backing and it was reasonably priced, cut perfectly to size for 4" tiles and it had excellent adhesion. Unfortuantely, my supplier, Marck & Associates dropped them off their list ... I assume demand just wasn't there. :'-(

John
John & Alexa Montgomey
Lakeshore Engraving

From:	Mick	27 Feb 2007
To:	John (JOHNRMONTG)	11 of 13

6135.11 In reply to 6135.10
You can buy it at McMaster Carr and cut it yourself Mick Cactus Equipment & Supplies www.cactus-equipment.com 800-440-6847

From:	John (JOHNRMONTG)	27 Feb 2007
To:	Mick	12 of 13

6135.12 In reply to 6135.11
Hi Mick ... thanks a lot for that supplier! John John & Alexa Montgomey Lakeshore Engraving

From:	Mike (SPACE_ENGRAVERS)	27 Feb 2007
To:	Betty	13 of 13

6135.13 In reply to 6135.6

Betty, I might be interested. Where in Colorado are you? I'm in Colorado Springs...

Mike

Space Engravers
www.space-engravers.com
25W Epilog Profile