Locating a Heart outline - Engraving Etc. Forum

From:	Funkmeister (FUNKY)	26 Mar 2007
To:	ALL	1 of 8

6432.1

Does anyone have a good quality heart outline they would like to share with me. I had a person come in Sat. wishing to purchase 50 name badges. On on the badge will be a heart rainbow. Each outline of the heart will be a different color. I think I'm going to sublimate the badges.
I will have to take each heart and reduce it to fit into the other heart. I cant seem to find a good clean heart for this job. Doe anyone have a good clean heart they could share with me.

Boy did I leave this door open for kinds of remarks.

Thanks for any help!!!
Someone call me a doctor >.<

EDITED: 26 Mar 2007 by DGL

From:	Bill (BILL_S)	26 Mar 2007
To:	Funkmeister (FUNKY)	2 of 8

6432.2 In reply to 6432.1

Funky,

I always just use the one in Corel basic shapes. In case you have forgotten where it is, click on the basic shapes icon on the left hand menu bar (right above the artistic text icon); Then click on the pull down arrow on the slanted rectangle in the middle of the upper tool bar: click on the heart symbol and draw away. You can modify it to your "hearts" content to make it look like what you want.

Bill

From:	Funkmeister (FUNKY)	26 Mar 2007
To:	Bill (BILL_S)	3 of 8

6432.3 In reply to 6432.2
Thanks for info... I knew it was someplace in Corel. That's gonna work just fine. Thanks agian

From:	geebeau	27 Mar 2007
To:	Bill (BILL_S)	4 of 8

6432.4 In reply to 6432.2

Is there something like that in Corel 9?

Steve

Steve
Custom ID & Awards

From:	Bill (BILL_S)	27 Mar 2007
To:	geebeau	5 of 8

6432.5 In reply to 6432.4

Sorry, but I started with v12 and then upgraded to X3 so I don't have any knowledge of prior versions :-( .

But I'm sure someone who knows will hop in with the answer :D .

Bill

From:	geebeau	28 Mar 2007
To:	Bill (BILL_S)	6 of 8

6432.6 In reply to 6432.5
Thanx.. :> Steve Custom ID & Awards

From:	Pedaler (ROYBREWER)	28 Mar 2007
To:	geebeau	7 of 8

6432.7 In reply to 6432.4
Steve, I think 9 has basic shapes, but possibly Corel had not included the heart in version 9. I would remind you that you have an "artsy" heart in the Webdings Symbol font that I think was available in Corel 9. In the meantime, I'll attach a heart that might do(?). Roy Brewer http://www.engravingconcepts.com Epilog/Xenetech distributor

From:	geebeau	28 Mar 2007
To:	Pedaler (ROYBREWER)	8 of 8

6432.8 In reply to 6432.7

Thanks..

Steve

Steve
Custom ID & Awards

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!