Ruben,

I am using X3 to print the files. There was a SUBSTANTIAL difference between the tile with the embedded profile and the tile where I changed it to the epson stylus pro 4000 profile.

Now I will save the file using NO color management as you say.... and see what happens.

Yes, printing on tiles can be expensive, but I must ask, if I print to polyester fabric, will the color be slightly off because of the difference in substrate? If not, I'll try the polyester....

Off to the lab for more experimenting....( insert mad scientist evil laugh here)

Thanks

Chuck,

in polyester there is a little difference but not much you can get true colors in polyester material and you can tell when you are getting good colors or not, when you see an acceptable result then you can try in tile, I think this way you will save some money, specially you that pay such expensive deliveries, another advantage you have in using polyester material is like in this case, you can save different images with different profiles and print them together and compare.

Also try the Epson Adobe RGB (1998)

Ruben