Dye-Sub Am I understanding this right?

From:	gt350ed	5 Apr 2007
To:	Becky (KIAIJANE)	21 of 32

6537.21 In reply to 6537.18
From MIS Associates, order two of each: SLC-T007-EC SLC-T009-EC These are the empty black and color carts. Also, order the chip resetter. I don't have the part number. It's somewhere on their website, along with their phone number. I never ordered the refill "kit". You may want to. I don't believe you need it. Other than syringes, you'll be good to go. Ed Holley Victor Valley Trophy & Awards Co. and Coffee Mugs Online www.coffeemugsonline.com

From:	gt350ed	5 Apr 2007
To:	Becky (KIAIJANE)	22 of 32

6537.22 In reply to 6537.18
MIS Associates' phone number is 1-248-391-2163. I believe they are in Michigan. Ed Holley Victor Valley Trophy & Awards Co. and Coffee Mugs Online www.coffeemugsonline.com

From:	Stunt Engraver (DGL)	5 Apr 2007
To:	gt350ed	23 of 32

6537.23 In reply to 6537.16
Ed, Thanks for the update. I haven't used the spongeless, refillable carts, although I've seen them in action. No bad reports from the people I know who use them. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	PenTrophy (PENINSULATROPHY)	5 Apr 2007
To:	Becky (KIAIJANE)	25 of 32

6537.25 In reply to 6537.24

Are we still talking about sublimation ink ???

2 oz $86 75ml per color
4 oz $140 125 ml
8 oz $240 250ml
16 oz $406 500ml

....
...
..
.
Mark
In the Great Northwest!

EDITED: 5 Apr 2007 by PENINSULATROPHY

From:	Stunt Engraver (DGL)	5 Apr 2007
To:	Becky (KIAIJANE)	26 of 32

6537.26 In reply to 6537.19
Becky, At last weekend's Coast Graphic Supply Learning Center, I found that even though the Epson 4000 is being replaced by the 4800, there are aspects of the 4000 that make it more desireable than a 4800. Has to do with some of the desireable functionality of the 4000 that has been eliminated in the 4800. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	John (JOHNRMONTG)	6 Apr 2007
To:	Stunt Engraver (DGL)	27 of 32

6537.27 In reply to 6537.26
Hi David .... have you seen any of the new advertisements for the system that features the 4800? It is using a system that effectively makes a 4800 a 'dual use' printer in the fact that you put both sub inks and conventional inks in them (at the same time). Altho it doesn't work like the 4000 with the double 4 ink setup it is one that will make it even more versatile. John John & Alexa Montgomey Lakeshore Engraving

From:	Stunt Engraver (DGL)	6 Apr 2007
To:	John (JOHNRMONTG)	28 of 32

6537.28 In reply to 6537.27
John, Yes, I've seen where the 4800 can be used for dye sub and other cartridges are brought into play for printing transparencies for film positives, used in the silkscreen process, as one example. I've also seen where Sawgrass uses that printer model for their Chromablast system, where dye sub is one function and another ink formulation is used for printing 100% cotton garments etc. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	John (JOHNRMONTG)	6 Apr 2007
To:	Stunt Engraver (DGL)	29 of 32

6537.29 In reply to 6537.28
Hi David ... yes, the latter is the system I saw ... quite interesting isn't it? Don't know if a 4800 can be converted to it or not tho... John John & Alexa Montgomey Lakeshore Engraving

From:	Stunt Engraver (DGL)	6 Apr 2007
To:	jpkevin	30 of 32

6537.30 In reply to 6537.29
Kevin, Is the Epson 4800 the printer model used in the Sawgrass Chromablast method? Thank you, David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

From:	jpkevin	6 Apr 2007
To:	Stunt Engraver (DGL)	31 of 32

6537.31 In reply to 6537.30

Hi David,

Yes, the 4800 is the model that is the dual system. It uses two drivers....one is the Powerdriver for the sublimation side, and the other is the Chromablast driver to use that side. The only thing you have to manually change is the paper. It is a really cool option to allow you to do both technologies with one machine.

The 4000 is not set up to do this.

Kevin Lumberg
Sublimation Specialist
Johnson Plastics
1-800-869-7800
kevinl@johnsonplastics.com

From:	Stunt Engraver (DGL)	6 Apr 2007
To:	jpkevin	32 of 32

6537.32 In reply to 6537.31
Thank you Kevin. I've never used a 4800, but I try to pay attention to what's happening with the latest equipment. :-) Have a good weekend. David "The Stunt Engraver" Lavaneri DGL Engraving Port Hueneme, CA

Show messages: 1-20 21-32

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!