Need good, used chip collector - Engraving Etc. Forum

Tools & Equipment Need good, used chip collector

Press Ctrl+Enter to quickly submit your post

Quick Reply

✏✏✏✏✏✏✏✏✏✏

From:	laserman (MIKEMAC)	5 Apr 2007
To:	UncleSteve	9 of 10

6550.9 In reply to 6550.1

UncleSteve,

What we used to do was to drill a couple of 1/4 holes into the top part of the hose of the vacuum this allowed for some cooling air and did not reduce the suction.

CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers.
2800 S. Main St.,Unit C
Santa Ana, Ca 92707
714-444-2385 Cem Lasers

From:	UncleSteve	5 Apr 2007
To:	laserman (MIKEMAC)	10 of 10

6550.10 In reply to 6550.9
I can try that.... the noise won't lessen but at least it will make the shopvac last longer... I know that the old Electrolux tank vacuums had holes in the metal end of the hose with a clip that went around most of it. By turning the clip, it uncovered different amounts of holes to lessen the suction... Now if I could find an old hose..... <G> "Good friends can be a real annoyance."

Show messages: All 1-8 9-10

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!

Forum Stats