Tape for rotary table - Engraving Etc. Forum

From:	joyce (JLADY)	25 Apr 2007
To:	ALL	1 of 4

6740.1
I know there is a tape out there for engraving tables, you can keep one piece down and easily lift off plates. Who makes it??? I use the multimat looking for other options also......for rotory not laser.

From:	Puck (PUCKERBRUSH)	25 Apr 2007
To:	joyce (JLADY)	2 of 4

6740.2 In reply to 6740.1

I get mine from Western Trophy & Sign Supply out of Portland OR, they are also located in AZ and CA. 1-800-775-2927 (T-1, 2 or 3 is the number).

It's made by Intertape, non-permanet double sided tape. This is the tape I prefer but there is also another that I just remembered that is clear and made for the engraving table which is number T-7, 8 or 9( I don't use this kind but a lot of engravers do).

Puck

Puckerbrush
Engraving and Signs

EDITED: 25 Apr 2007 by PUCKERBRUSH

From:	John (ICTJOHN)	25 Apr 2007
To:	joyce (JLADY)	3 of 4

6740.3 In reply to 6740.1
quote: use the multimat looking for other options also If you use the Multi-Mat.............. dosen't it leave a silicone residue (oil slick) on the table???? Mine does and I don't think the engraving table tape would stick unless you cleaned the table throughly before each use. Report back to us to see what you work out. hth, ~ John http://www.creative-awards.com creativeawards@msn.com

From:	GBengraver	25 Apr 2007
To:	joyce (JLADY)	4 of 4

6740.4 In reply to 6740.1

Quality One sells a cloth tape that I use.

The tape is 2" wide and I cut it about 1/4" (so you have a piec about 1/4" X 2") it sticks great and lasts forever.

If you get it from Quality One, be sure and ask for the cloth tape, they also sell a paper table tape that doesn't work quite as well.

Greg

"Nothing is really work unless you would rather be doing something else."

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 | FAQ | Docs | Support | Donate!