Folder Where Can I Find?Tape for rotary table


Warning Press Ctrl+Enter to quickly submit your post
Quick Reply  
✏✏✏✏✏✏✏✏✏✏
 
 
  

Previous
Next
 From:  John (ICTJOHN)
 To:  joyce (JLADY) 
6740.3 In reply to 6740.1 
quote:
use the multimat looking for other options also


If you use the Multi-Mat.............. dosen't it leave a silicone residue (oil slick) on the table???? Mine does and I don't think the engraving table tape would stick unless you cleaned the table throughly before each use.

Report back to us to see what you work out.


hth,

~
John
http://www.creative-awards.com
creativeawards@msn.com
 

Previous
 From:  GBengraver
 To:  joyce (JLADY) 
6740.4 In reply to 6740.1 

Quality One sells a cloth tape that I use.

The tape is 2" wide and I cut it about 1/4" (so you have a piec about 1/4" X 2") it sticks great and lasts forever.

If you get it from Quality One, be sure and ask for the cloth tape, they also sell a paper table tape that doesn't work quite as well.

Greg

"Nothing is really work unless you would rather be doing something else."
 
 
     
 

Show messages: All  1-2  3-4

Rate my interest:

Adjust text size: Smaller 10 Larger

Beehive Forum 1.0.1 |  FAQ |  Docs |  Support |  Donate! ©2002 - 2024 Project Beehive Forum

Forum Stats