From: Cody (BOBTNAILER) [#11]
13 Jul 2006
To: ALL
Hehehe...
I want to see his reply to the back-scratching comment!
From: Dee (DEENA-ONLY) [#12]
13 Jul 2006
To: Dee (DEENA-ONLY) [#10] 13 Jul 2006
Thanks for the suggestions. I will try them tomorrow.
Dee
From: Peter [#13]
13 Jul 2006
To: Dee (DEENA-ONLY) [#12] 13 Jul 2006
ok everyone move on ...theres nothing to see here...... B-)
n-o-t-h-i-n-g- t-o- s-e-e- h-e-r-e-......... B-)
From: Shaddy [#14]
13 Jul 2006
To: Dee (DEENA-ONLY) [#12] 13 Jul 2006
You can google "Plastic Razor Blade" and get some good returns.
Shaddy
From: Upacreek [#15]
13 Jul 2006
To: Dee (DEENA-ONLY) [#1] 13 Jul 2006
Fake nails have blunt edges while real nails have sharper edges and varying thickness. Just guessing, but you might want to try taking a nail file and file the edges from "underneath" just slightly to create a sharper edge. (You don't want to muss up the purty nail polish on top, right? ;-) )
With the sharper edge you can then use your new nails as tools, aka scrapers, to be able to peel the film off. The sharper edge should be just enough to wedge under the film.
Michel
From: UncleSteve [#16]
13 Jul 2006
To: Cody (BOBTNAILER) [#2] 14 Jul 2006
Oh, I'm making them..... just not POSTING them...... (devil)
From: Engravin' Dave (DATAKES) [#17]
13 Jul 2006
To: Dee (DEENA-ONLY) [#12] 13 Jul 2006
Dee,
My shop is a couple doors down from a nail shop. I'll have them done and experiment for you. I'll get back to you. Do you think candy apple red would be a good color on me? >.<
EDITED: 13 Jul 2006 by DATAKES
From: Dee (DEENA-ONLY) [#18]
14 Jul 2006
To: Engravin' Dave (DATAKES) [#17] 14 Jul 2006
David,
I think that might be a bit too drastic. Why don't you try fuchsia? Make sure you get square tips not round. As Kathy noted it will take a day or two to get used to them.
I will be anxiously awaiting your test results. You could be the guy responsbile for changing the way women in the engraving work force appear. A hero you would be! On top of that maybe Peter would get a good back scratching! You would then be a double hero!
Dee
From: Engravin' Dave (DATAKES) [#19]
14 Jul 2006
To: Dee (DEENA-ONLY) [#18] 14 Jul 2006
Dee,
I liked the ideas of the square tips, but just couldn't decide on color, so I went crazy. Do you like?
EDITED: 14 Jul 2006 by DATAKES
From: Dee (DEENA-ONLY) [#20]
14 Jul 2006
To: Engravin' Dave (DATAKES) [#19] 14 Jul 2006
David,
All I see is a red x in a box. I think your link is bad. My fingers are crossed that you will get it fixed.
Dee
From: Shaddy [#21]
14 Jul 2006
To: Dee (DEENA-ONLY) [#20] 14 Jul 2006
He probably just mistyped, I bet it's hard to type with long nails for the first time :O
Shaddy
From: UncleSteve [#22]
14 Jul 2006
To: Shaddy [#21] 14 Jul 2006
Has anyone considered how this thread is going to affect Chuck? ;-)
From: Button (LASERCHICK) [#23]
15 Jul 2006
To: ALL
O.k., I have been out of town for a few days and just got back and read this. I have been a nail technician for years. I quit to do laser work. You can learn to do anything with nails, you just have to figure out new ways for some things. I will give you a few tips.
To peel off a thin layer of anything, I find it best to get a thin tool with a sharp edge and keep it around. If you use your nail and scrape it over something too many times, you will find that the acrylic will start to wear down, making your artificial nail a little misshapen.
To open a can of pop, bend your index finger and use the side of your finger.
To undo your seatbelt, bend your index finger and and push the joint into the seat belt.
Don't open car doors with your finger tips---there will come a time that your fingers slip and it really does a number on you. I have seen a real nail taken off half way down into the nail bed. Not only is that bloody and ugly, it is painful!
Don't use your nails as tools. They are super strong, but sometimes if you hit them in just a right way, they will break, and you know how expensive they are! I even use mine as screw drivers, but then I do them myself.
From: John (ICTJOHN) [#24]
15 Jul 2006
To: Dee (DEENA-ONLY) [#20] 15 Jul 2006
Dee,
I have had 3 ladies work for me with the acrylic nails, I just give them a "screen printers" squeegee (clean) and they rub it across a corner and it peels a little bit of the plastic up so you can grab it with your fingers. This process will not scratch or harm any surface, in fact, it does not even harm the squeegee.
;-)
hth,
From: Kat (KATHY) [#25]
16 Jul 2006
To: Upacreek [#15] 16 Jul 2006
quote:
Fake nails have blunt edges while real nails have sharper edges and varying thickness. Just guessing, but you might want to try taking a nail file and file the edges from "underneath" just slightly to create a sharper edge. (You don't want to muss up the purty nail polish on top, right? ;-) )
With the sharper edge you can then use your new nails as tools, aka scrapers, to be able to peel the film off. The sharper edge should be just enough to wedge under the film.
Michel
hey this might be way I can have long nails and still give a good back scratch.
hehehe
Kathy
Edited by Harvey to do quote and auto-line breaks.EDITED: 17 Jul 2006 by HARVEY-ONLY
From: Peter [#26]
16 Jul 2006
To: Kat (KATHY) [#25] 17 Jul 2006
quote:
hey this might be way I can have long nails and still give a good back scratch.
hehehe
Kathy
Puuurrrrrrrrrrr...growwwllll! :-) :P B-)
From: Cody (BOBTNAILER) [#27]
17 Jul 2006
To: Peter [#26] 17 Jul 2006
Awwright...get a room, you two.
>.<
From: UncleSteve [#28]
17 Jul 2006
To: Cody (BOBTNAILER) [#27] 17 Jul 2006
Cody,
They tried that and it didn't work.... They had to get a room and a BUSINESS, TOO!!!! (devil)
From: Peter [#29]
17 Jul 2006
To: UncleSteve [#28] 17 Jul 2006
quote:
They tried that and it didn't work.... They had to get a room and a BUSINESS, TOO!!!! (devil)
too many kids...too little time...too much fun......
Man I love this business !
Peter :-)
From: UncleSteve [#30]
17 Jul 2006
To: Peter [#29] 17 Jul 2006
Peter,
Having had the pleasure of meeting you and Kathy, I truly believe you are one of the few couples I know that can live and work together 24/7 and never have too much of each other! B-)
Show messages:
1-10
11-30
31-36