Press Recommendations - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=627.12">Press Recommendations</a></h1><a name="a627_12"></a><p><b>From: Engravin' Dave (DATAKES)</b> [<a href="lmessages.php?webtag=EE&msg=627.12">#12</a>]<br /> 24 Mar 2005<br /><b>To: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.11">#11</a>] 24 Mar 2005</p> <p>Michael,</p> <p>I am sure that you recall a while back that I filed a formal complaint with the U.S. Consumer Product Safety Commission (USCPSC) on this very subject. It is appearant that my effort has fallen on deaf ears.</p> <p>The USCPSC is another typical under-funded government agency that was created to serve an important need of U.S. citizens. The politicians obviously don't see the importance of providing adequate funding to assure a prompt evaluation and response to all concerns, many of which can result in death or serious injury.</p> <p>I agree that this issue remains a serious one and requires a continual pursuit for some resolution.</p> <hr /><a name="a627_13"></a><p><b>From: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.13">#13</a>]<br /> 24 Mar 2005<br /><b>To: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.11">#11</a>] 25 Mar 2005</p> Michael... thanks for the email.... hey, I like the reference to "Alice's Restrant" ...now I will be singing that in my mind all day long. :-) If you have a chance, I would love to read the correspondence. Do you feel the same problem exists with their 16 x 20 swingaway press? <hr /><a name="a627_14"></a><p><b>From: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=627.14">#14</a>]<br /> 24 Mar 2005<br /><b>To: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.13">#13</a>] 24 Mar 2005</p> <p>John,</p> <p>I read on DSSI, where a DK20 (16x20 swing away model) user, out of the blue, received a new wire harness (or other electrical component) for his/her machine.</p> <p>Without admitting a defect, it seems Knight is addressing the wiring issues. That's in no small part (IMO) to the pressure exerted through the online forums.</p> <p>David "The Stunt Engraver" Lavaneri<br /> DGL Engraving<br /> Port Hueneme, CA</p><hr /><a name="a627_15"></a><p><b>From: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.15">#15</a>]<br /> 25 Mar 2005<br /><b>To: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.13">#13</a>] 25 Mar 2005</p> <p>I've forwarded the entire communication to you John.</p> <p>As to any other presses manufactured by G Knight I cannot say because I have no experience with them. </p> <p><br /> Michael</p><p class="edit_text">EDITED: 25 Mar 2005 by MICHAEL</p> <hr /><a name="a627_16"></a><p><b>From: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.16">#16</a>]<br /> 25 Mar 2005<br /><b>To: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.15">#15</a>] 26 Mar 2005</p> Hi Michael.. I appreciate you taking the time to forward the email. <hr /><a name="a627_17"></a><p><b>From: GBengraver</b> [<a href="lmessages.php?webtag=EE&msg=627.17">#17</a>]<br /> 25 Mar 2005<br /><b>To: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.15">#15</a>] 26 Mar 2005</p> <p>Michael,<br /> Can you also forward me the communication you had with Aaron?<br /> Thanks</p><hr /><a name="a627_18"></a><p><b>From: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=627.18">#18</a>]<br /> 25 Mar 2005<br /><b>To: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.16">#16</a>] 26 Mar 2005</p> <p>John,</p> <p>I haven't requested the exchange between Michael and Aaron Knight.</p> <p>I'll wait for the reviews from those who have.</p> <p>The reason I'm not so curious? I can already picture the conversation, based on the many stories I hear, every day, regarding companies who treat their (valued?) customers like small potatoes.</p> <p>Painfully familiar story - just a different company.</p> <p>David "The Stunt Engraver" Lavaneri<br /> DGL Engraving<br /> Port Hueneme, CA</p><hr /><a name="a627_19"></a><p><b>From: Michael</b> [<a href="lmessages.php?webtag=EE&msg=627.19">#19</a>]<br /> 26 Mar 2005<br /><b>To: GBengraver</b> [<a href="lmessages.php?webtag=EE&msg=627.17">#17</a>] 26 Mar 2005</p> <p>Sure will, but you'll have to give me an email address. </p> <p>Michael</p><hr /><a name="a627_20"></a><p><b>From: John (JOHNRMONTG)</b> [<a href="lmessages.php?webtag=EE&msg=627.20">#20</a>]<br /> 26 Mar 2005<br /><b>To: Stunt Engraver (DGL)</b> [<a href="lmessages.php?webtag=EE&msg=627.18">#18</a>] 26 Mar 2005</p> David... perhaps you should request it... then 'you will know the rest of the story' as Paul Harvey so adequately states... <hr /><p align="center">Show messages: <a href="lmessages.php?webtag=EE&msg=627.1">All</a>  <a href="lmessages.php?webtag=EE&msg=627.1">1-11</a>  12-20</p> <h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2025 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>